Net 30
Piper Products RCM081T Shock Freezers/Blast Chillers
Why use Piper Products Shock Freezers/Blast Chillers ?
Only Piper's equipment has the advantage of technology and certification. This ensures that your food is kept "out of the DANGERZONE." Food spoilage occurs mainly because of rapidly accelerated bacteriological activity within the 40F-140F "DANGER-ZONE." Since there is no simple way of knowing when the degree of contamination has risen to a level which could result in illness or death, chilling or freezing food rapidly is the only answer. FDA & HACCP regulations permit a maximum of 6 hours to chill food from 140 to 40 degrees, while some states now permit only 4 hours. This is 6 to 8 times faster than what traditional refrigeration equipment can accomplish. Blast chilling and shock freezing are the key factors in HACCP compliance and the fight against foodborne pathogens.
Piper Products RCM081T Standart Features
- Monoblock construction.
- Outside side-panels and top in stainless steel (Scotch-Brite satinfinish)
- Insulated stainless steel door with Scotch- Brite satin finish
- Deflector can be opened on side hinges, in order to clean the evaporator
- Inside bottom die-formed leakproof
- Insulation in high-density (93 lbs) expanded polyurethane, 2.36" thick, HCFC-free
- Copper evaporator coil with aluminum fins protected against corrosion with an electronically applied epoxy paint 20 microns thick
- Copper condenser with aluminium fins at high thermic efficiency
- Electro-Fin (coating to protect fins from corosion)
- Anti-condensation heating element in the body, below the magnetic gasket
- Full length ergonomic handle and magnetic gasket on all four sides of the door
- Stainless steel feet 2" with adjustable height 5.91-7.09"
- Self-closing doors with stop in open position at 100°
- Heated core probe standard (in blast freezers) for easy extraction
- Standard right hinged door
Piper Products RCM081T Internal Fitting And Cooling Unit
- Stainless steel 18/10 glide supports joint fixed in the sides of the cooling compartment.
- Distance between the slides couples is 2.56"
- Hermetically sealed compressor
- Evaporator fitted with high flow rate fan for maximum cooling efficiency
- Fans with indirect flow onto the product eliminate product dryout
- Ecological refrigerant R404A
- Manual defrosting device and evaporation system of water condensation without electrical energy
Piper Products RCM081T Electrical Control Board
- Electronic control board equipped with display, which shows the status of the appliance in every moment.
- The microprocessor is able to memorize till 100 programs.
- The "T" electronic control can memorize eventual alarms, and can control up to 4 core probes or 4 sensors Defrosting with activation of an electric heating element fitted on the evaporator.
- Compressor protected by overload cut-out with automatic reset Microswitch cuts out the evaporator fan and compressor when the door is opened.
