Efficient Exhaust and Supply Solution for High‑Volume Kitchens
Delivers reliable capture and ventilation for busy restaurant operations.
Key Features
- 6‑ft wall canopy hood with 14" wide perforated supply plenum and 3" back standoff for optimal airflow distribution.
- Dual fans: 1380 CFM exhaust (DU85HFA, 0.75 HP) and 1104 CFM supply (A1‑G10D, 1 HP) with speed controls for precise ventilation balance.
- Stainless‑steel 430 construction on exposed surfaces and a 80" × 84" SS backsplash for durability and easy cleaning.
- Four Captrate Solo stainless‑steel filters (85% efficiency at 9 µm) provide high particulate capture without compromising airflow.
From The Manufacturer
Hood #1 - Job #3485910
5424ND-2-PSP-F - 6ft 0" Long Exhaust-Only Wall Canopy Hood with 14" Wide Front Perforated Supply Plenum with Built-in 3" Back Standoff x1
- 430 SS Where Exposed x1
- Utility Cabinet on the Right Side 12.00" Width x 54.00" Length x 24.00" Height x1
- FILTER - 20" tall x 16" ( 19.625" by 15.625") wide Stainless Steel Captrate Solo filter with hook, ETL Listed. Particulate capture efficiency: 85% efficient at 9 microns, 76% efficient at 5 microns. Used on hoods shipped AFTER 7/27/17. x4
- L55 Series E26 Canopy Light Fixture - High Temp Assembly, Includes Clear Thermal and Shock Resistant Globe (L55 Fixture), Bulbs By Others x2
- EXHAUST RISER - Factory installed 12" Diameter X 4" Height x1
- SUPPLY RISER - 10"x 28" Supply Riser with Volume Dampers x2
- 1/2 Pint Grease Cup New Style, Flanged Slotted x2
- BACKSPLASH 80.00" High X 84.00" Long 430 SS Vertical (Includes End Caps & Divider Bars) x1
- Electrical Package Installation in Utility Cabinet by Plant. x1
- Parts required to mount prewire sensor in capture volume of hood. Sensor installed directly in line with center of riser and in center of capture volume front to back. Sensor supplied from ECP tied to hood. x1
Fan #1 DU85HFA - Exhaust Fan - Job #3485910
DU85HFA High Speed Direct Drive Centrifugal Upblast Exhaust Fan with speed control (speed control included for single phase only), disconnect switch and 15-3/4" wheel.
Exhaust Fan handles 1380 CFM @ -1.160" wc ESP, Fan runs at 1265 RPM.
Exhaust Motor: 0.750 HP, 1 Phs, 115 V, 60Hz, 9.8 FLA, ODP (Open Drip Proof) x1
- Grease Cup for kitchen-duty centrifugal exhaust fans,
Box Dimensions 17-1/8 L X 5-1/16 W X 3-3/4 H (20 GA.) (Includes Down Spout) x1
- Curb CRB23X26E On Fan #1 Flat Curb x1
- Hinged Base for Curb. Standard Hinge attached to curb. Used on Fans with wheels 20 inches or smaller. 12 GA Galvanized. x1
- Vented Base for Curb x1
Fan #2 A1-G10D - Supply Fan - Job #3485910
A1-G10 Direct Drive Untempered Supply Unit with 10" Blower in Size #1 Housing with speed control, disconnect switch.
Supply Fan handles 1104 CFM @ 0.350" wc ESP, Fan runs at 702 RPM.
Supply Motor: 1.000 HP, 1 Phase, 115 V, 60Hz, 10.2 FLA, ODP-ECM (Open Drip Proof Electronically Commutated Motor)
Down Discharge - Air Flow Right -> Left x1
- Sloped Filtered Intake for Size #1 Standard Untempered Supply Unit.
22" Wide x 25.875" Long x 23.375" High.
Includes 2" MV EZ Kleen Metal Mesh Filters. x1
- ECM Wiring Package and Manual or 0-10VDC Control for Supply EC motors. RTC Controller. **DO NOT ORDER UNDER WARRANTY, SEE PART NUMBER "ECM-VCU-RTC"**. x1
- Curb CRB21X20 On Fan #2 Flat Curb x1
Images are for reference. Color, configuration, dimensions and what's included vary by model.
