Powerful Exhaust Solution for High‑Volume Kitchens
Delivers reliable, high‑volume exhaust and supply airflow for busy 8‑ft commercial kitchen hoods, keeping grease and heat out of the cooking area.
Key Features
- 8‑ft wall canopy hood with 16" perforated supply plenum, 3" back standoff, and 430 SS exposed surfaces.
- Dual ECM fans: 0.75 HP exhaust (1840 CFM @ 1.23 in wc) and 1 HP supply (1472 CFM @ 0.5 in wc) with speed control.
- ETL‑listed 20" × 16" stainless steel Captrate Solo filter (85% at 9 µm, 76% at 5 µm) – five units included.
- Utility cabinet (12" × 54" × 24") houses L55 Series E26 high‑temp canopy lights and electrical package for easy install.
- Includes 1/2‑pint flanged grease cups, 14" exhaust riser, 12" × 28" supply riser with dampers, and 80" × 108" SS backsplash with end caps.
From The Manufacturer
Hood #1 - Job #3485954
5424ND-2-PSP-F - 8ft 0" Long Exhaust-Only Wall Canopy Hood with 16" Wide Front Perforated Supply Plenum with Built-in 3" Back Standoff x1
- 430 SS Where Exposed x1
- Utility Cabinet on the Right Side 12.00" Width x 54.00" Length x 24.00" Height x1
- FILTER - 20" tall x 16" ( 19.625" by 15.625") wide Stainless Steel Captrate Solo filter with hook, ETL Listed. Particulate capture efficiency: 85% efficient at 9 microns, 76% efficient at 5 microns. Used on hoods shipped AFTER 7/27/17. x5
- L55 Series E26 Canopy Light Fixture - High Temp Assembly, Includes Clear Thermal and Shock Resistant Globe (L55 Fixture), Bulbs By Others x3
- EXHAUST RISER - Factory installed 14" Diameter X 4" Height x1
- SUPPLY RISER - 12"x 28" Supply Riser with Volume Dampers x2
- 1/2 Pint Grease Cup New Style, Flanged Slotted x2
- BACKSPLASH 80.00" High X 108.00" Long 430 SS Vertical (Includes End Caps & Divider Bars) x1
- Electrical Package Installation in Utility Cabinet by Plant. x1
Fan #1 DU85HFA - Exhaust Fan - Job #3485954
DU85HFA High Speed Direct Drive Centrifugal Upblast Exhaust Fan with speed control (speed control included for single phase only), disconnect switch and 15-3/4" wheel.
Exhaust Fan handles 1840 CFM @ -1.230" wc ESP, Fan runs at 1426 RPM.
Exhaust Motor: 0.750 HP, 1 Phs, 115 V, 60Hz, 8.9 FLA, TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor) x1
- Grease Cup for kitchen-duty centrifugal exhaust fans,
Box Dimensions 17-1/8 L X 5-1/16 W X 3-3/4 H (20 GA.) (Includes Down Spout) x1
- ECM Wiring Package and Manual or 0-10VDC Control for Exhaust EC motors. RTC Controller (No harness when ordered as a part). x1
- Curb CRB23X26E On Fan #1 Flat Curb x1
- Hinged Base for Curb. Standard Hinge attached to curb. Used on Fans with wheels 20 inches or smaller. 12 GA Galvanized. x1
- Vented Base for Curb x1
Fan #2 A1-G10D - Supply Fan - Job #3485954
A1-G10 Direct Drive Untempered Supply Unit with 10" Blower in Size #1 Housing with speed control, disconnect switch.
Supply Fan handles 1472 CFM @ 0.500" wc ESP, Fan runs at 854 RPM.
Supply Motor: 1.000 HP, 1 Phase, 115 V, 60Hz, 10.2 FLA, ODP-ECM (Open Drip Proof Electronically Commutated Motor)
Down Discharge - Air Flow Right -> Left x1
- Sloped Filtered Intake for Size #1 Standard Untempered Supply Unit.
22" Wide x 25.875" Long x 23.375" High.
Includes 2" MV EZ Kleen Metal Mesh Filters. x1
- ECM Wiring Package and Manual or 0-10VDC Control for Supply EC motors. RTC Controller. **DO NOT ORDER UNDER WARRANTY, SEE PART NUMBER "ECM-VCU-RTC"**. x1
- Curb CRB21X20 On Fan #2 Flat Curb x1
Images are for reference. Color, configuration, dimensions and what's included vary by model.
