InSinkErator WASTE COLLECTION SYSTEM

Standard Features :

Requires only 1 GPM (3.79 LPM) of fresh water per hour
Capable of recirculating water up to 30 GPM (113.56 LPM)
Fully operational in 70 seconds – protected against dry operation
Easy access ball valve allows operators to quickly reposition water plume
Scrap basket features ¼" (6.35 mm) diameter screen and ergonomic handles
Collected solids can be disposed of into a waste or compost receptacle
Two mountings: Standard Tray (for everyday applications) and Pot/Pan Tray (for oversized cookware, such as large sheet pans)
Workspace-maximizing cover design creates a level foundation for scrapping and pre-soaking problem dishes with baked-on or difficult to remove food
Tray, base assembly, cover, pump housing, and pump impeller all made from durable, corrosion-resistant stainless steel construction
NEMA 4X stainless steel electrical control box
High impact polymer scrap basket
Pump safeguarded by ¼" (6.35 mm) inlet screen and dry-start protection
Fits under standard table – minimum height 33" (838 mm)
Flanged feet allow unit to be secured to floor
Built-in shut off timer automatically shuts off system after predetermined length of time (factory set at 20 minutes)
System can be manually shut off at any time
Quick and easy to clean – dishwasher safe components

From The Manufacturer

PowerRinse® Pot/Pan (Model PRP™) - Complete Waste Collection System Package. Requires only 1 GPM (3.79 LPM) of fresh water per hour. Pre-rinse and scrapping system with 30 GPM (113.56 LPM) recirculated water flow capability, dry start protection, and adjustable run time. Pre-plumbed and pre-wired base assembly with control, solenoid and pump; integrated air gap; stainless steel mounting tray, base assembly, cover, pump housing, 1/4" pump inlet screen, and pump impeller; 1/4" perforated scrap basket with four ergonomic handles; flanged feet; check valves; 2" drain discharge; 1/2" NPT water inlets.