InSinkErator WASTE COLLECTION SYSTEM

Standard Features :

Operating cycle requires only 1 GPM (3.79 LPM) of fresh water
Capable of recirculating water up to 70 GPM (264.98 LPM)
Pump operational in 60 seconds – protected against dry operation
Scrap basket features ¼" (6.35 mm) diameter screen and ergonomic handles
Collected solids can be disposed of into a waste or compost receptacle
Basket cover designed to keep silverware and small dishes out of scrap basket
Tray, base assembly, basket cover, pump housing and pump impeller all made from durable, corrosion-resistant stainless steel construction
NEMA 4X stainless steel electrical control box
High impact polymer scrap basket
¾ HP Pump safeguarded by ¼" (6.35 mm) inlet screen and dry-start protection
Fits under standard table – minimum height 33" (838 mm)
Flanged feet allow unit to be secured to floor
Built-in shut off timer automatically shuts off system after predetermined length of time (factory set at 20 minutes)
System can be manually shut off at any time
Quick and easy to clean – dishwasher safe components

From The Manufacturer

PowerRinse® Trough (Model PRT™) - Complete Waste Collection System Package. Requires only 1 GPM (3.79 LPM) of fresh water per hour. Pre-rinse and scrapping system with 70 GPM (264.98 LPM) recirculated water flow capability, dry start protection, and adjustable run time. Pre-plumbed and pre-wired base assembly with control, solenoid and pump (requires additional plumbing for trough); 1 trough diffuser assembly; integrated air gap; stainless steel mounting tray, base assembly, basket cover, pump housing, 1/4" pump inlet screen, and pump impeller; 1/4" perforated scrap basket with four ergonomic handles; flanged feet; check valves; 2" drain discharge; 1/2" NPT water inlets