0% Interest for 30 Days
Frymaster/Dean 1FPRG50T 31" Floor Model Gas Full Pot Fryer w/ 50 Lbs Capacity
Standard Features
- Thermo-Tube design heat transfer system
- 50-lb. (25 liter) oil capacity per frypot
- Btu/hr. input-- 120,000 Btu/hr. (30,600 kcal) (35.2 kw)
- Frying area-- 14” x 14” x 3-1/2” (35 x 35 x 8.9 cm)
- Built-in filtration
- Millivolt controller
- Durable temperature probe
- Stainless-steel frypot, door, and sides
- Four twin baskets
- 1-1/4” NPT gas connection with 1” bushing
- Combination gas valve with regulator
- Wide cold zone
- Casters
- Drain safety switch
Filter Standard Features
- Space-saving filter fits inside fryer cabinet which houses two or more frypots
- Large capacity filter pan removes easily for cleaning
- Sloped drain pan leaves minimal oil in the pan after filtering
- Large 3” (8.0 cm) round drain line allows oil to drain freely
- Filter cycle is complete from start to finish in under 5 minutes, while other frypots in the system are in use
- Filters all fryers in the battery
- Rear oil flush
- 1-1/4” (3.2 cm) diameter, one-point end connection, rear manifold gas line without shut-off valve
- 1/3 H.P. filter motor
- 4 GPM pump (15 LPM)
- Filter starter kit
Specifications
- These all-purpose fryers feature outstanding Dean reliability and durability. PowerRunner™ fryers achieve long and dependable life through simplicity of design. The 50-lb oil capacity of each frypot accommodates a wide range of frying needs -- everything from French fries, breaded products and specialty foods.
- Make the most of your energy dollars with Dean’s exclusive Thermo-Tube design. The heating tubes efficiently transfer the fryer’s energy input into the oil with less going unused up the vent.
- A larger heat-transfer area reduces the heat per square inch needed to attain and maintain desired cooking temperatures, which reduces the oil’s heat load and therefore the breakdown of the oil. Stainless steel baffles and reliable, built-to-last burners keep maintenance to a minimum. Precise temperature control during heat-up and recovery protects oil from excessive high-heat damage. The wide cold zone traps sediment away from the cooking area, safeguarding oil quality and the quality of the food.
- High-production cooking capacity and fast recovery meet high-volume frying needs.
- Dean’s renowned, built-in filtration system puts filtration where it’s most convenient to use -- right within the fryer battery -- eliminating the need for additional floor and storage space.
- The filtering process is fast and easy, encouraging frequent filtering -- a critical part of maximizing oil life, especially with trans-fat free oils. It is engineered with features that allow added convenience and ease of use.
- This system is enhanced with a gravity draining system that allows residual oil to drain into the filter pan so that drain lines are always open. The filter is capable of filtering up to four fryers, individually, without having to be moved from fryer to fryer, saving valuable labor.
- This filter comes standard with a powerful 4 GPM pump to maximize filtering efficiency and minimize clogging. A large sump with a secure hold-down ring ensures proper vacuum and superior oil filtration. The stainless steel filter pan is equipped with casters and an automatic connection for ease of access.
- Filtration process is two steps: - Step one: open drain valve, open return valve to activate filter pump. - Step two: close drain valve; close return valve to turn off pump.
From The Manufacturer
PowerRunner™ Fryer, gas, floor model, 50 lb. capacity, built-in filtration, thermo tube-type design, temperature probe, millivolt control system, includes: filter starter kit, drain safety switch, 4 GPM pump, stainless steel frypot, door, & cabinet, (1) 120,000 BTU, cCSAus, NSF
