0% Interest for 30 Days
Everpure EV998058 WS-30E Single Water Conditioner, 30,000 Grains/tank @ 15 lbs Salt/cu.ft. Capacity
Features And Benefits
- Hardness removal of 30,000 grains at flow rates up to 10 gpm (37.8 Lpm) continuous
- Advanced, user-friendly controls incorporate time-tested, hydraulically-balanced piston, seal and spacer design to pilot service flow and regeneration
- Pentair® Fleck® 5600-SXT meter-initiated control valve monitors water usage and minimizes salt and water usage
- Five-cycle control delivers controlled upflow backwash, downflow brining and slow rinse, rapid rinse, timed brine refill and downflow service
- Fiberglass-reinforced resin vessels with NSF-approved polyethylene liners guard against corrosion and optimize performance
- Single tank design for simplicity, efficiency, and space savings
- Large capacity brine tank maximizes time between salt replenishments
Installation Tips
- Locate equipment on a smooth, level surface.
- Maintain an air-gap at the end of the drain line.
- Secure drain line directly over floor drain or stand pipe.
- When connecting to a water heater, install a check valve on the soft water piping to prevent hot water back-up.
- When sweating/installing copper piping, protect the control valve from excessive heat.
- Check local codes for additional equipment that may be required, such as backflow prevention devices (i.e. RPZ).
From The Manufacturer
WS-30E, Single Water Conditioner, 30000 grains/tank @ 15lbs. salt/cu.ft. capacity, 1 cu.ft. resin volume, 10 gpm continuous @15psi (1 bar), 0.75 inch pipe size, 90 ship weight, 550 operating weight
