The Cleveland 24CGM200 Classis Series Convection Steamer
Why Use Cleveland SteamCub Steamers?
All true Convection Steamers have a drain. The drain not only prevents
pressure from building up in the compartment, but it also enhances the
heat transfer process and keeps the compartment cleaner. The condensing
system allows hot condensate to be forced down the drain so fresh steam
can transfer the heat into the food more efficiently.
Cleveland Classic Series Gas Convection Steamers now come standard with NickelGuard™ and a 100% Full 5 Year Boiler Warranty (includes parts and labor). A highly effective nickel technology for carbon steel boilers that resists scale and corrosion. Provides a hard film similar to stainless steel, dramatically improving boiler life.
Cleveland 24CGM200 Standard Features
- Cooking Capacity for up to ten 12˝ x 20˝ x 21⁄2˝ deep Cafeteria Pans, five each compartment.
- Pressureless cooking with forced convection steam, permitting doors to be opened while cooking continues.
- Solid State Controls operate water level and safety functions.
- Each compartment is equipped with a 60 minute mechanical timer, separate bypass switch for constant steaming and a cold water condenser for superior cooking results.
- Instant Steam Stand By Mode: Hold generator at a steaming temperature. Allows unit to start cooking instantly.
- Durable 14 Gauge, Stainless Steel Construction: For Compartment Door and Steam Cooking Cavity.
- Separate Main Power Switch for “On/Off”
- Exclusive Steam Cooking Distribution System: The exclusive Convection Jets produce a high velocity convection steam without fans. Coved Corner design in cooking compartment distributes heat evenly and is easy to keep clean. Creased top & bottom enhance drainage. Cold Water Condenser for each compartment maintains a dry steam. Fully insulated cooking compartment for thermal efficiency. Removable Stainless Steel Slide Racks for easy cleaning.
- Exclusive Automatic Probe for Water Level Control: Separate from the generator for easy access, contains a high velocity rinse cycle to eliminate mineral build up.
- Exclusive “Cool to the Touch” Compartment Door Design: Free floating inner door with reversible gasket provides an air tight seal. Stainless Steel Slam/Latch Door Latch mechanism for reliability.
- Left Hand Door Hinging: Compartment Doors hinged on the left, controls on the right.
- Modular Cabinet Base with Hinged Door.
- Automatic Generator Drain at shutdown:Contains a “Water Jet” Spray Rinse Cleaning Cycle to keep drain clear.
- Automatic Generator Mineral Purging Cycle automatically cleans generator, reducing scale build up
- Automatic Water Level Control System with Low Water Power Cut-off Circuit.
- Steam generator equipped with High Limit Pressure Safety Switch, 15 psi Safety Valve, and Steam Generator Pressure Gauge.
- Secondary Low Water Cut-Off, factory installed (CALG)
- NSF Certified 6˝ Stainless Steel Legs with adjustable flanged feet for a one inch level adjustment.
- Gas Pressure Regulator and Control Valve.
- Standard Voltage for Control: 115 volts, 60 Hz, single phase
- All Controls are serviceable from the front.
Cleveland 24CEM24 Specification
CLEVELAND Convection Steamer, Gas-fired Steam Generator with NickelGuard. Solid State Controls operate timing, water level and safety functions. Steam Generator with Automatic Water Fill on start-up, Automatic Blowdown with additional Manual Drain Valve and Electronic Spark Ignition. For each cooking compartment: 60 minute Mechanical Timer, Manual Operation Mode and Cold Water Condenser. Type 304 Stainless Steel cooking compartment.






















