Delfield F17FC94P 94" 2 Drawers Equipment Stand
Standard Features
- Top is 18-gauge stainless steel, with integral front marine edge
- Cutting board brackets with 1.25" thick x 9.50" deep maple cutting board
- High density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Globala Warming Potential) polyurethane foam throughout unit
- Snap in dart style vinyl magnetic gasket
- Drawer handles are recessed black plastic and held in with a positive lock system
- 6.12" adjustable full stainless steel legs
- 8’ cord and plug supplied
- Interior refrigerated base cabinet section to maintain 36º to 41º
- Digital thermometer
- Drawer system holds 12" x 20" x 4" deep hotel pans on refrigerated models. 12" x20" x 8" deep hotel pans for freezer models.
- Environmentally friendly R290 refrigerant
Specifications
- Stainless steel top is constructed with integral front marine edge nosing and rear backsplash. Stainless steel bars run front to back on both sides for support and spline purposes. Stainless steel interior sub-top is made integral with the top by injecting 2.00" of high density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam between the tops. Cutting board brackets are attached to each side and house a 1.25" thick x 9.5" deep maple cutting board.
- Refrigerated base interior back and bottom are constructed of stainless steel. Exterior back and bottom are made of galvanized steel. Exterior sides made of stainless steel. Both left and right interior sides are formed of ABS plastic. The base is injected with 2.00" of high density polyurethane foam between the exterior and interior. Refrigerated base fronts are made of .095" thick ABS thermoformed plastic and backed up by ridged polyurethane water blown injection molded frames.
- Single units are supplied with wall-mounted bracket and threaded rod to allow installation of the unit against a solid surface.
- Drawer system is sized to hold 12" x 20" x 4" deep hotel pans and smaller fractional pans on refrigerated models. Drawer system is sized to hold 12" x 20" x 8" deep hotel pans and smaller fractional pans on freezer models and available on refrigerated models. Drawer system is all stainless steel construction. Tracks are designed with a stay shut feature that holds the drawer gasket tight to the base front on uneven floors. Exterior drawer fronts are made of stainless steel; and an interior made of ABS plastic with formed in channels to house the snap-in dart style santoprene gasket. Each drawer front is injected with 1.87" of high density polyurethane foam between the exterior and interior. Handles are recessed black plastic and held in with a positive lock system.
- Legs: Unit is mounted on 6.12" adjustable stainless steel legs.
- Refrigeration system uses R290 refrigerant, and maintains 36˚F (2˚C) to 40˚F (4˚C) interior cabinet temperature at 100˚F (38˚C) ambient room temperature. Interior cabinet is cooled with mullion style blower coils (coated) mounted between each door/drawer section for even air and temperature control.
- An electronic temperature control and pre-wired condensing unit with hot gas condensate evaporator are installed in the machine compartment. The digital Thermometer with stainless steel guard is located in the Top nosing above the machine compartment (standard on right) .
- Electrical connections are 115V-60H-1PH. Units are supplied with an 8’ cord and plug
From The Manufacturer
Equipment Stand, 94" long, freezer drawer base with (2) 32" drawers, self-contained, stainless steel top and legs, unfinished ends & back, 9" removable maple cutting board, electric condensate evaporator, R290 Hydrocarbon refrigerant, (2) 1/3 HP, cUL, UL, NSF,
Images show the product series. Color, configuration, included items and accessories vary by model. See the spec sheet for this model.
