Everpure EV927200 QL3 BH² Water Filtration System w/ 0.5 Micron and 0.5 GPM, 3,000 Gallons
Features And Benefits
- Provides clear, fresh, premium quality ingredient water for great tasting coffee and beverages
- Sanitary cartridge replacement is simple, quick and clean; internal filter parts are never exposed to handling or contamination.
- Engineered to always feed the correct amount of scale inhibitor into each volume of water
- Proportioned scale inhibitor feed
- Proprietary Everpure® Micro-Pure® II media inhibits the growth of bacteria
- Precoat submicron technology reduces dirt and particles as small as 0.5-micron in size
- Everpure's unique filter blend using activated carbon reduces chlorine taste & odor and other offensive contaminants
- Increases holding time of coffee
- Saves energy by reducing scale buildup.
- Dramatically prevents limescale from forming in brewers
- Reduces health contaminants such as cysts
Installation Tips
- Never use saddle valve for connection.
- Use 3/8" water line.
- Install vertically with cartridges hanging down.
- Allow 2 ½" (6.35 cm) clearance below the cartridge for easy cartridge replacement.
- Flush BH Cartridge by running water through filter for three (3) minutes at full flow.
Operation Tips
- Replace cartridge when flow rate becomes inconveniently slow or before rated capacity is reached. It is recommended to replace cartridge at least once per year.
- Change cartridges when capacity is reached or when pressure falls below 10 psi (0.7 bar).
- Service flow rate must not exceed 0.5 gpm (1.9 Lpm).
- Always flush the filter cartridge at time of installation and cartridge change.
From The Manufacturer
QL3 Water Filtration System, QL3 BH², Single, (1) BH² Micro-Pure® II Precoat primary filtration cartridge, reduces chlorine, taste & odor, inhibits scale, 3,000 gallons, 0.5 gpm, 0.5 micron, 3/8" inlet, 3/8" outlet, NSF 42 & 53
