Salvajor Trough Collector
Standard Features:
- Recirculated Water used by the system for scrapping reduces water and sewer costs. The Trough Collector consumes only 2 gallons of fresh water per minute.
- Trough Water Volume with the Trough Collector is 70 gallons per minute. This volume swiftly propels food waste down the trough and into the Collector with no additional hand movement, leaving both hands free for high-volume scrapping. The Trough Collector will let you keep up with large conveyor or flight dishmachines
- Design Flexibility is offered by the Collector as troughs can turn corners. The Collector’s high water volume allows the design of wider, longer troughs allowing you to soak problem dishes or add gusher heads to pre-rinse compartmental trays.
- HydroLogic Water Saving Control has an adjustable timer with user friendly LCD readout.
- Trough must have a minimum 3" depth with a fall of at least 3/32" per running foot towards the collector.
- Minimum 6" clearance is required from the trough to the wall to allow room for recirculation piping.
- 22" minimum clearance overhead for basket removal. An additional basket is recommended at additional cost.
From The Manufacturer
Trough Collector™, trough conveyor & collecting system (widely accepted in areas where disposers are restricted), HYDROLOGIC® with LCD readout, trough diffuser, salvage basin & silverware trap, scrap basket, 3/4 HP corrosion-resistant pump, pump intake screen ,stainless steel construction, start/stop pushbutton control panel, with safety line disconnect & automatic shut off timer, UL, CSA, CE, NSF















