Southbend HDG-24-316L 24" Countertop Thermostatic Gas Griddle, 1" Steel Plate, 60.000 BTU

Southbend HDG-24-316L Features

• HDG-24-316L: 24" Thermostatic Griddle - Heavy Duty Counterline - Gas - 60,000 BTU
• Available in 18” and 24” widths
• 30,000 BTU (NAT or LP) burner per 12” Thermostatic Models
• Electronic spark ignition (battery)
• 316L stainless steel front, rear, sides, and bottom panels
• Reinforced, insulated double wall sides
• 1” thick polished rolled steel plate
• 5” high 316L stainless steel rear and side splash guards
• 3/4” rear gas connection and pressure regulator
• Protected flue opening
• Exclusive “NO COLD” Zone - Uniform heat distribution across surface
• Each burner equipped with runner tube
• Grease drawers with large capacity
• Fully welded griddle plate with protected exhaust vent
• “Insta-on” thermostatic controls for precise settings between 200°F and 400°F
• Imbedded load sensing thermostat
• Flame failure safety device

Southbend HDG-24-316L Specification

• Exterior Finish: Front, sides and vent are constructed of #3 polished 430 and 304 stainless steel. Bottom and rear are aluminized steel. Sides are reinforced and fully insulated. 5” rear and 4” side splash.
• Griddle Plate: 18” and 24” wide unit with one 30,000 BTU Fully welded, 1” thick polished steel griddle plate with side splash guards, and grease drawer.
• Griddle Controls: Independent, “Insta-on” thermostatic controls with uniform temperature range of 200°F to 400°F.
• Legs: Stainless steel 4” adjustable legs.
• Gas Heat Control System: Each griddle is heated by a “U” shaped burner. Each burner is controlled by a thermostatic control. For safety, each pilot has a flame failure device. A 3/4” rear gas connection is standard.

WARRANTY & SERVICE REQUEST

“Do you need service? Is your product under warranty? Please fill out the form at the link below.”