Southbend HDG-36V 36" High Volume Countertop Thermostatic Gas Griddle, 90.000 BTU

Southbend HDG-36V Features

• HDG-36V: 36" Thermostatic Griddle - Heavy Duty Counterline - High-Volume - Gas - 90,000 BTU
• 30,000 BTU (NAT) burner per 12”
• Electronic spark ignition (battery)
• Stainless steel front, vent and sides are standard, rear and bottom panels are aluminized steel.
• Reinforced, insulated double wall sides
• 1” thick polished rolled steel plate
• 5” high rear and 4” side splash guards
• 3/4” rear gas connection and pressure regulator
• Protected flue opening
• Exclusive “NO COLD” Zone - Uniform heat distribution across surface
• Each burner equipped with runner tube
• Two grease basins with large capacity (16 quarts each)
• Fully welded griddle plate with protected exhaust vent
• “Insta-on” thermostatic controls for precise settings between 200°F and 400°F
• Imbedded load sensing thermostat
• Flame failure safety device
• Stainless steel front towel bar

Southbend HDG-36V Specification

• Exterior Finish: Front, sides and vent are constructed of #3 polished 430 and 304 stainless steel. Bottom and rear are aluminized steel. Sides are reinforced and fully insulated. 5” rear and 4” side splash.
• Griddle Plate: 48” wide unit, 30,000 BTU (NAT) per 12” burner. Fully welded, 1” thick polished steel griddle plate with side splash guards.
• Griddle Controls: Independent, “Insta-on” thermostatic controls with uniform temperature range of 200°F to 400°F. (Thermostatic models ONLY)
• Casters: 4” casters for stand.
• Gas Heat Control System: Each foot of griddle is heated by a “U” shaped burner. Each burner is controlled by a thermostatic control. For safety, each pilot has a flame failure device. A 3/4” rear gas connection is standard

WARRANTY & SERVICE REQUEST

“Do you need service? Is your product under warranty? Please fill out the form at the link below.”