0% Interest for 30 Days
The Southbend HDG-48-30 48" Thermostatic Griddle
Why Use Southbend Griddle?
The Southbend Heavy-Duty Counterline products are designed for medium to heavy-duty applications. Southbend's counterline offers unsurpassed performance, combining proven control systems with Southbend quality and durability.
Southbend HDG-48-30 Features
- HDG-48-30: 48" Thermostatic Griddle - Heavy Duty Counterline - Gas - 120,000 BTU
- 1” thick polished rolled steel plate, 30” deep
- 30,000 BTU (NAT or LP) burner per 12” Thermostatic Models
- Electronic spark ignition (battery)
- Stainless steel front, vent and sides are standard, rear and bottom panels are aluminized steel.
- Reinforced, insulated double wall sides
- 5” high rear and 4” side splash guards
- 3/4” rear gas connection and pressure regulator
- Protected flue opening
- Exclusive “NO COLD” Zone -Uniform heat distribution across surface
- Each burner equipped with runner tube
- Grease drawers with large capacity
- Fully welded griddle plate with protected exhaust vent
- Stainless Steel stand
- “Insta-on” thermostatic controls for precise settings between 200°F and 400°F
- Imbedded load sensing thermostat
- Flame failure safety device
Southbend HDG-48-30 Specification
- Exterior Finish: Front, sides and vent are constructed of #3 polished 430 and 304 stainless steel. Bottom and rear are aluminized steel. Sides are reinforced and fully insulated. 5” rear and 4” side splash.
- Griddle Plate: 48” and 60” wide by 30” deep cooking surface with one 30,000 BTU (NAT or LP) burners every 12” on thermostatic models and one 20,000 BTU (NAT or LP) burners every 12” on manual models. Fully welded, 1” thick polished steel griddle plate with side splash guards, and grease drawer.
- Griddle Controls: Independent, “Insta-on” thermostatic controls with uniform temperature range of 200°F to 400°F. (Thermostatic models ONLY)
- Stand: Stainless steel
- Gas Heat Control System: Each foot of griddle is heated by a “U” shaped burner. Each burner is controlled by a thermostatic control. For safety, each pilot has a flame failure device. A 3/4” rear gas connection is standard. Units over 48” wide are constructed of two bodies.(Thermostatic models ONLY)
WARRANTY & SERVICE REQUEST
“Do you need service? Is your product under warranty? Please fill out the form at the link below.”
Warranty & Service Request FormFrom The Manufacturer
Griddle, floor model, gas, 48" W x 30" D cooking surface, 1" thick polished steel plate, thermostatic controls, battery spark ignition, flame failure safety device, stainless steel front & sides, 4” adjustable legs, 120,000 BTU, CSA, NSF
