UNOX USXHC005 Ops175Cr/16 Reverse Osmosis System with 16-Gallon Hydropneumatic Storage Tank

Snapshot

The OptiPure® OPS175CR/16 utilizes Reverse Osmosis (RO) to remove >97% of the Total Dissolved Solids (TDS) from water. Then, a balance of minerals is dissolved into the RO water to provide optimized water with desirable TDS for recommended applications. The system can produce up to 175-gallons per day operating at line-pressure and includes an integrated pre-filter which reduces sediment and chlorine, and a post filter for chloramine reduction. The OPS175CR/16 includes an operating pressure gauge and a hydropneumatic storage tank that holds up to 16-gallons to meet specific demand requirements. The system also has a built-in manual bypass valve. The compact design can be wall-mounted or installed under the counter and comes with tubing and fittings required for installation.

System Benefits

• Significantly reduces scale and corrosion problems related to high TDS, water hardness and chlorides.
• Ideal for combi and steam oven applications where mineral reduction is necessary to meet manufacturer’s warranty requirements.
• Integrated mineral-addition cartridge provides TDS needed for conductivity sensors and optimal mineral content for steam equipment applications.
• High capacity pre filter takes out sediment and chlorine and protects the RO membrane.
• Operating pressure gauge allows visual monitoring of system production and pre-filter condition.
• Plumbed-in post-filter reduces chloramine.
• Sealed hydropneumatic storage tank provides needed capacity and delivers pressurized water to downstream equipment.
• Optimized water line to equipment is ½” ID hose. A ¾” Garden Hose Thread (GHT) connector is provided for connection to equipment when applicable.
• Integrated system bypass valve eliminates costly service interruptions and down-time.
• Compact, modular design utilizes installation under counters and in tight spaces.
• Non-electric design operates on available water pressure.
• Simple, easy-to-install and service design.

Installation Tips

• Feed-water connection to system should be COLD only.
• Do not exceed system specifications for temperature and pressure.
• Provide a dedicated feed water supply with a 1/2” FPT valve.
• For use with steam generation only. Do not use for condensate or wash-water.
• Allow 3” clearance below system for filter cartridge removal and replacement.
• Detailed, illustrated installation guide is included with each system.