0% Interest for 30 Days
UNOX UX164-01502A Reverse Osmosis System
Snapshot
The OptiPure® OPS70CR/2 utilizes Reverse Osmosis (RO) to remove >97% of the Total Dissolved Solids (TDS) from water. Then a balance of minerals is dissolved into the RO water to provide optimized water with desirable TDS for the recommended applications. The system can produce up to 75-gallons per day operating at line-pressure and includes an integrated pre-filter to protect the RO membrane against sediment and chlorine and post filter for chloramine reduction. The OPS70CR/2 includes a hydropneumatic storage tank that holds up to 2.5-gallons when full to meet the specific demand requirements. The system also has a built-in manual bypass valve. The compact design can be wall-mounted or installed under counter and comes with tubing and fittings required for installation.
System Benefits
- Significantly reduces scale and corrosion problems related to high TDS, water hardness and chlorides.
- Ideal for combi and steam oven applications where TDS, chloride and hardness reduction are necessary to meet manufacturer warranty requirements.
- Integrated mineral-addition cartridge provides TDS needed for equipment sensors and buffers against aggressive nature of RO water.
- High capacity pre-filter and post filter protects the membrane against damage from sediment and chlorine and reduces chloramine.
- Sealed hydropneumatic storage tank provides needed capacity and pressure to downstream equipment.
- Optimized water line to equipment is ½” ID hose. A ¾” Garden Hose Thread (GHT) connector is provided for connection to equipment when applicable.
- Integrated system bypass valve eliminates costly service interruptions and down-time.
- Compact, modular design allows installation under counters and in tight spaces.
- Non-electric design operates on available water pressure.
- Simple, easy-to-install and service design.
Installation Tips
- Feed-water connection to system should be COLD only.
- Do not exceed system specifications for temperature and pressure.
- Provide a dedicated feed water supply of at least 3/8” I.D.
- For use with steam generation only. Do not use for condensate or wash-water.
- Allow 3” clearance below system for filter cartridge removal and replacement.
- Detailed, illustrated installation guide is included with each system.
