Net 30 
STERO SCT-120S/SC Rack Conveyor Series
Why Stero SCT-120S/SC:
The STERO SCT-120S/SC will process over 8,400 dishes per hour. It starts with the same wash and rinse system as the SCT-76 only in a 88" base for more separation allowing a conveyor speed of 13 feet per minute. Add a unique 32" scrapper to create the SCT-120S/SC. This scrapper features a 28 jet sprayer manifold located above and below the ware to create STERO’s most powerful scrapping system, replacing the need of a manual pre-rinsing operation and lowering detergent costs. The SCT-120S/SC process features a power scrapper, heated recirculating wash and rinse tanks equipped with a 28 jet sprayer manifold top and bottom located in each tank, followed by a fresh water rinse in a 120" footprint. Rinsing and sanitizing is controlled by STERO’s exclusive rack activated final rinse which provides accurate, trouble free cleaning.
The STERO SCT-120S/SC can be engineered in a straight line or with an optional corner loading scrapper.
Standard Features:
- 468 racks per hour
- Rinse 5.3 gpm /.68 gallons per rack
- Automatic fill maintains proper tank levels
- Automatic start, rack activated switch starts conveyor and pumps
- Automatic shut down stops operation during idle periods
- 2 HP wash and rinse motor each recirculating 225 gpm
- Single point drain connection
- 2 large inspection doors
- Center-fed wash and rinse manifolds
- Stainless steel front enclosure panel protects motors and controls from moisture
- Door safety switches prevents operation if door is open
- Stainless steel drain valves and poppets, foot activated
- Kit 55, includes prv, shock arrestor and pressure gauge in final rinse line
- Bell-type stainless steel skimmer acts as overflow and removes fats and oils from the wash tank
