0% Interest for 30 Days
The Delfield 18699PTLP Self-contained Refrigerated Pizza Prep Table with Flush Mount LiquiTec Raised Rail
Why Use Delfield's Pizza Prep Table?
Advanced Benefits - Greater Results.
Maximizes kitchen spaces for efficient production. Flush mounted pan design allows for better operator ergonomics and improved visability and reach to all the products with superior cooling technology!
Add To The Menu
Add to the menu without crowding the kitchen. Add toppings and products to the operation in the same space and in the same overall footprint.
Double Capacity, Half The Footprint.
48” PDL =(12) 1/3 size pans = standard 99” PTB. 72” PDL = (18) 1/3 size pans = has no equal. This is the largest capacity of any standard pizza table available anywhere.
Consistent Temperatures
Consistent temperatures are maintained below 41 ̊ F. Keep food fresh and appealing, enhancing your revenue opportunities and minimizing waste.
Evaporator Coils
Mullion style evaporator coils mount between door openings to allow full depth storage and improved air circulation throughout the cabinet.
Vad is Patented LiquiTec?
Patented LiquiTec® uses eutectic fluid permanently sealed in a jacket surrounding the pan opening as the cooling medium. Refrigerant lines cool the eutectic fluid, which in turn, cools the pan. This fluid remains a liquid at extremely cold temperatures, providing consistent, even super cooling, keeping food fresh and safe. Eutectic fluid surrounds the sides and bottom of the pan providing 100% more surface contact than a traditional mechanically cooled pan. Safe Food – LiquiTec performance meets strict NSF7 standards. Food can be held in open pans at less than 41 ̊ F for 4 hours. This helps you maintain safe food handling practices in your operation.
Full Extension Plus Drawer System
Delfield’s full extension plus drawer system literally surpasses every drawer on the market today. In fact they extend a full 15% further than other manufactures.
Delfield 18699PTLP Standart Features
- High density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam throughout unit
- 18699PTLP: 99" Raised Rail LiquiTec Pizza Table
- Top is constructed of 18-gauge stainless steel
- 22-gauge stainless steel ends are standard
- Rail is mechanically cooled utilizing LiquiTec® technology with die stamped 12"X20" openings
- Pans and adapter bars by others
- 20" cutting board is standard
- Flush mount NSF-7 certified pans
- Dart style quick change gaskets
- Stainless steel removable hinged covers
- On/off switch is located behind the louver
- 1.50" diameter hole in louver for easy access to rail on/off switch
- 8' long electrical cord
- Environmentally friendly HFC-404A refrigerant
- One year parts and labor warranty
- Electronic Controls
Delfield 18699PTLP Specification
- Exterior Top: Constructed of one-piece 18-gauge stainless steel, with integral 2.12" (5cm) high square nosing at the front. Top has a mechanically cooled LiquiTec® refrigerated raised rail at the rear with openings to accommodate pans (pans and adapter bars are not included). Rail interior is 22-gauge stainless steel. Raised rail openings have 18-gauge stainless steel hinged removable lids. Unit is equipped with separate expansion valve and on/off switch for refrigerated rail. Temperature in top openings maintains 33°F (1°C) to 41°F (5°C) with pans flush mounted at 86°F (29.7˚C) ambient room temperature, meeting NSF 7 requirements.
- Exterior Back, Bottom and Ends: 24-gauge galvanized steel back and bottom. Exterior ends are finished with 22-gauge stainless steel.
- Base Interior: Stainless steel back and bottom. Base interior sides and door frames are thermoformed ABS plastic. Each interior door section has (1) 25" (64cm) deep removable epoxy coated wire shelf. Base is insulated with 2" (5cm) high density foamed in place polyurethane. End of base has a machine compartment with condensing unit installed.
- Refrigeration System: HFC-404A refrigerant. Cabinet has (1) blower coil assembly with expansion valve on 48" and 72" models and (2) on the 99" model, located in coil housing. Base is equipped with independently controlled thermostat, solenoid valve and condensate evaporator. Refrigerated base maintains temperature of 36°F (2°C) to 40°F (4°C). On/off switches for rail and base are located behind the louvered panel. A 1.50" diameter hole is on the louver for easy access to rail on/off switch.
- Electronic control for base reads air temperature. Electronic control for rail displays temperature for set point purposes only. Display does not reflect air or product temps in unit.
- Electrical Connections: 115 volt, 60 Hertz, single phase. Unit is wired with 3-wire, grounded, maximum 8’ (2.4m) cord and plug.
- Door(s): 22-gauge stainless steel exterior front, with a thermoformed ABS plastic interior liner.
- Casters: Equipment is mounted on 5" (13cm) diameter casters; overall height of casters is 6.13" (16cm).
