FWE HS-24-ES Handwashing System
Why use FWE HS-24-ES Handwashing System ?
Contactless portable hand sink with water heater is self-contained to allow safe hand washing and sanitizing in remote locations
FWE HS-24-ES Standard Features
- FWE’s contactless portable hand sinks are perfect for any location, making it possible to offer practical hand washing when it is needed to meet safety standards
- Faucet and soap dispenser both have highly responsive, automatic motions sensors for safe and touchless hand washing
- Made for transport applications - FWE hand sinks are fully constructed of stainless steel and equipped with heavy-duty maintenance free casters
- Marine top edge and backsplash prevent spills and drips while on the move
- Provided with a 5 gallon fresh water tank for consistent draw and a 7 gallon waste water tank to hold drainage
- Water heater with adjustable thermostat (65°-145°F) quickly warms water for dispensing when needed
- Lockable door prevents unauthorized access for safety and security
- Paper towel holder and cord exit can be easily moved to either side, providing flexibility in field placement (only one cord exit on HS-24-ES)
FWE HS-24-ES Specifications
- CONSTRUCTION. Heliarc welded, single unit construction of 20 gauge stainless steel with easy-to-clean coved corners. Front edge shall have raised marine nosing to contain water. Backsplash shall be 8.5" high
- DOORS AND LATCHES. Flush mounted, stainless steel door. Full length magnetic recessed workflow handle with locking cam latch. Heavy duty pin style hinges.
- CASTERS. Maintenance-free polyurethane tire casters in a configuration of two (2) rigid and two (2) swivel with brake.
- WATER CAPACITY. The unit shall include one (1) five gallon fresh water tank and one (1) seven gallon waste water tank. Electric water heater with adjustable thermostat provides a temperature range of 65°-145°F (19°-62°C) and heats up to 2.7 gallons of water. Glass insulated tank for thermal efficiency and fast recovery
- FAUCET CHARACTERISTICS. Faucet shall be motion activated and powered by four (4) AA Batteries. Faucet shall have a concealed thermostat control. Faucet water pressure shall be two (2) gallons per minute.
- SOAP DISPENSER CHARACTERISTICS. Soap dispenser shall be motion activated and shall be powered by four (4) D batteries. Recommended soap refill: Rubbermaid FG4015411 800ml.
- ELECTRICAL CHARACTERISTICS. 3 wire grounded 10 foot extension power cord and plug. HS-24 cord and plug are fed through right side cord exit. Alternative left side cord exit provided. HS-24-ES cord and plug are fed through the front of the unit only. See electrical data chart above for amperage and receptacle configuration.
- OVERALL EXTERIOR DIMENSIONS IN. (mm) : 44.25″ (1131) h x 24.5″ (623)d x 24.75″ (629)w
- CASTER SIZE : 5"
- SHIP WT. LBS. (KG) : 235 (93)
From The Manufacturer
Executive Series Self-Contained Hand Washing System, electric, maple wood sides, (1) 5 gallon fresh water tank, (1) 7 gallon waste water tank, (1) 2-1/2 gallon water heater (120v), (1) lockable door, marine top edge, built-in backsplash, removable paper towel holder, touchless/motion sensor faucet & soap dispenser, water pump, stainless steel construction, 5" casters (2) rigid & (2) swivel with brakes, NSF
















