Net 30
The Everest EBWRH2 Bottom Mount Reach-In Refrigerator
Why use Everets Refrigerator?
The series provides versatility in storage, display and temperature combinations in a traditional, bottom mounted design. It also features a deeper cabinet to meet the operator's specific storage needs. Patented vacuum relief valves in addition to conventional pressure relief mechanisms ensure rapid re-entry while keeping an airtight seal. Equipped with the Blizzard R290 system, a fully self-contained and detachable condensing unit which uses natural, environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
The Everest EBWRH2 Refrigeration System
- Bottom mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing
- Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption
- Full-length air duct system and airflow guard ensure optimal circulation of cold air.
- Time-initiated and temperature-terminated auto defrost heater.
- Large capacity, corrosion-resistant condenser and evaporator coils.
- Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
- High performance condenser fan motors ensure efficient compressor ventilation. R290 models use auto-reverse condenser fan motors which also support condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
- Pressure relief devices allow smooth access to cabinet interior when re-opening doors.
- Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
Cabinet Construction And Door
- Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
- Galvanized steel top, bottom and rear.
- 2.5" thick high density polyurethane insulation.
- Deeper cabinet interior for more storage options.
- Four 5" swivel casters with locks on front set and two front leg stabilizers.
- Heavy duty stainless steel interior / exterior.
- 2.5" thick high density polyurethane insulation.
- Frame heaters prevent exterior moisture build up.
- Self-closing with adjustable torsion system for a positive seal.
- Snap-in magnetic door gasket make cleaning and replacement an easy process.
- High strength, recessed door handles.
- Pre-installed door locks keep your items safe from theft.
- Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.
Shelving And Temperature Control
- Three epoxy coated, steel wire shelves per section.
- Height adjustable stainless steel clips.
- Multi-function digital controller with easy to read LED display.
- Factory preset temperature, -4°F. Temperature setting range from -10°F to 54°F.
- Audible overheat protection alarm for compressor and condenser coil
From The Manufacturer
Reach-In Refrigerator, one-section, 29-1/4"W, 23.0 cu. ft. capacity, self-contained bottom mounted refrigeration, (2) wide half-height solid hinged self-closing field reversible doors (locking), (3) epoxy coated wire shelves, height adjustable clips, digital controls with LED display, auto defrost, LED interior lighting, stainless steel interior, stainless steel front & sides, galvanized steel top, bottom & rear, (2) leg stabilizers, (4) 5" swivel casters (2 locking), R290 Hydrocarbon refrigerant, 1/4 HP, 115v/60/1-ph, 3.7 amps, cord, NEMA 5-15P, NSF, cETLus, ETL-Sanitation
