Delfield F18SC52AP 52" Two Section Sandwich / Salad Prep Table
Standard Features
- 16-gauge stainless steel top construction
- Unfinished ends,
- Interior sub-top is made of ABS plastic
- 2BF stainless steel refrigerated base interior back and bottom
- High density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam insulation throughout unit
- Refrigerated base fronts are made of .095" thick ABS plastic backed by rigid polyurethane water blown injection molded frames. (NO WOOD)
- Exterior drawer fronts are stainless steel with ABS plastic liner
- Snap-in dart style vinyl magnetic gasket
- Recessed black plastic handles held in with a positive lock system
- 14-gauge leg rails that run the entire length
- 6.12" adjustable stainless steel legs and bullet feet
- 8' cord and plug on self
- Environmentally friendly HFC-404A refrigerant
- Cold pan to have 2BF stainless steel interior with pans recessed 2.00"
- Cold pan is sized for two 1/6-size pans deep. Pans and adapter bars by others
- Cold pan has a on/off switch and maintains NSF7 temperatures utilizing a pressure control
- Interior base cabinet is cooled with mullion style evaporator blower coils (coated) mounted between each door/ drawer section for very even air and temperature control
- Refrigerator interior maintains 36º to 40º at 100º ambient room temperature
Specifications
- Exterior Top: Constructed of one-piece 16-gauge stainless steel, with integral 2.12" (5.4cm) square nosing at the front, and 4.00" (10.2cm) high by 2" (5.1cm) deep backsplash at the rear. Top has an opening for use with 1/6 size pans. Pans and adapter bars supplied by others. Pans are recessed 2” (5cm) and rest on pan supports. Pan opening has a 20-gauge stainless steel removable cover. Temperature in top opening to maintain 33°F (1°C) to 41°F (5°C), with pans recessed 2” (5cm), at 86°F ambient room temperature, meeting NSF7 requirements.
- Unit has a stainless steel plate shelf 8.4” [21.3cm] above the doors.
- Exterior back and bottom to be 24-gauge galvanized steel. Exterior ends are 18-gauge galvanized steel.
- Base interior has a 22-gauge stainless steel back and bottom. Interior ends and door frames are thermoformed ABS plastic. Base is insulated with 1.5" (3.8cm) of high-density foamed-in-place polyurethane.
- Door(s) have a 22-gauge stainless steel exterior front, with a thermoformed ABS plastic interior liner. Door(s) have a black recessed handle and a snap-in magnetic gasket which is easily replaceable.
- Base has a machine compartment, standard on the right, with condensing unit, condensate evaporator and an electrical junction box installed. Machine compartment has a louver for access to condensing unit. Blower coil(s) are located behind the door mullions and refrigerate the cabinet. HFC-404A refrigerant and maintains 36°F (2°C) to 40°F (4°C) interior cabinet temperature in the base.
- Legs: Unit is mounted on 6.13" (15.6cm) high adjustable stainless steel legs.
- Electronic control for base reads air temperature. Electronic control for rail displays temperature for set point purposes only. Display does not reflect air or product temps in unit. On/Off switches for rail and base are located behind the louvered panel.
- Electrical Connections: 115 volts, 60 Hertz, single phase. Unit has an 8' (2.4m) long cord and plug.
From The Manufacturer
Refrigerated Counter, Salad Top, two-section, (2) 19" doors, stainless steel top with (6) 1/6 size pan opening recessed 2" (pans not included), plate shelf, ABS interior sides, stainless steel floor, unfinished ends & back, side-mounted self-contained refrigeration, 6.12" adjustable stainless steel legs, R404a refrigerant, cUL, UL, NSF, 1/4 hp
