Cleveland KEL40SH 40 Gallon Floor Stationary Full Steam Jacketed Electric Kettle w/ Tri-Leg Base

Why Use Cleveland Steam Jacketed Kettles?

Cleveland steam jacketed kettles offer ultra efficient heat transfer, uniform heating and superior product handling. Steam jacketed kettles offer faster cooking times because two thirds of the cooking surface comes into contact with the product at a much lower temperature, compared to stock pots that use a much higher temperature only at the bottom of the pot. In addition, accurate temperature controls eliminate constant monitoring and resetting. Foods won’t burn or scorch and you can hold product at a simmer without over cooking. Tilting models makes product handling simple. Clean up is easy since food isn’t burned or over cooked like stock pots. Ideal For: Soups, delicate sauces, pasta, gravies, desserts,stews, braising meats, rice, reheating dishes and holding them until serving.

Increases Quality and Productivity

• Heats from all sides and has 3-4 times larger heat surface than stock pots
• Gentle uniform cooking.
• Faster cooking times using high energy steam.
• Precision temperature controls from a simmer to a boil.
• No hot spots
• Eliminates pot watching, constant stirring and large stock pots.

Improves Operator's Profits By

• Reduces food waste due to over cooking and burning.
• Reheat meals without over cooking.
• Simmer food all day without over cooking.
• Simplifies and standardizes recipe and enhances recipe development.

Improves Worker Safety

• Tilting models make pouring safe.
• Eliminates heavy lifting and carrying hot stock pots.

Saves Energy and Time

• Kettles use 35% less energy than stock pots on an open burner.
• Keeps kitchens cooler.
• Eliminates scrubbing of messy stock pots.
• Butterfly shaped pouring lip accurately pours product into containers for serving.

Cleveland KEL40SH Standard Features

• Self-contained, easily installed - needs only an electrical hook-up
• Steam jacket filled with treated water, venting and/or refilling is not required
• Accurate, consistant solid state temperature controls (mechanical thermostat not as accurate) - less than ±1°C variance (ideal for simmering). Operating temperature range from 145° - 260°F (63°C - 127°C)
• Control panel includes:
  LED indicator for heat cycle
  LED indicator for low water
  Power ON/OFF switch
  Adjustable temperature control dial
• Easily cleaned: kettle and all exterior surfaces are of type 304 stainless steel with an #4 finish
• Rear mounted easy access pressure gauge and pressure relief valve to prevent tampering.Color coded easy to read pressure gauge with "green" and "vent air zone"
• IXP6 rated water resistant
• Re-inforced rolled rim design prevents damage to kettle rim, eliminates "bar rim designs"
• Welded-in heating elements, (holds vacuum better, won't leak or lose water)
• 50 psi steam jacket rating for higher cooking temperatures
• 50 psi safety valve
• Solid state water level control (no sight glass gauge to break or leak)
• Faucet mounting bracket
• 2˝ diameter tangent draw-off valve with drain strainer
• 1 5/8˝ O.D. tri-leg supports with level adjustable feet for floor bolting
• Standard voltage is 208-240 volts, 60 Hz, 3-phase, 3-wire
• Typical approvals include UL., CSA, CE, NSF and ASME

Cleveland KEL40SH Optional Features

• 316 Stainless Steel Interior Liner (316G)
• 3" diameter Tangent Draw-Off Valve w/Strainer (TD3), for 60 gallon only
• Hot & Cold Water Faucet (DPK)
• Kettle Accessory Kit (KAK)
• Tri-Basket Strainer Support Systems (TBS)
• Kettles Markings (KM)
• Measuring Strips (MS)
• Voltages other than standard (VOS)
• Correctional Packages
• High Wattage (HW) (see back page)
• Heat Deflector Shield (HS001)
• Insulated Outer Jacket (IOJ)

Cleveland KEL40SH Specification

CLEVELAND, Electric Kettle, Tri-leg mounted, short series with 35" rim height, self-contained, stationary, 2/3 Steam Jacketed. Type 304 Stainless Steel Kettle and Supports. Rated 50 psi with Safety Valve; Permanently filled Steam Jacket. Spring-assisted Domed Cover. (Provide 1.50" Freeboard above batches of rated size.) Splash Proof Solid State Temperature (±1° C) and Safety Control System in plug-in Module including L.E.D. indicators. Base Mounted for Floor Bolting with three (3), tri-bolt flanges. 2" diameter Tangent Draw-off Valve.