0% Interest for 30 Days
Groen TDA/1-40 10 Gallon Countertop Tilting 2/3 Steam Jacketed Direct Steam Kettle
Construction
Kettle proper shall be of 304 stainless steel, solid one piece welded construction. Support arms are heavy chrome plated steel tubing. Rim shall be reinforced with a welded butterfly shaped pouring lip, for pouring control and durability. Kettle shall have a right side handle for controlled pouring of kettle contents, and rear leg which stops kettle in upright position.
Finish
Interior of kettle shall be polished to a 180 emery grit finish. Exterior of kettle shall be finished to a bright high buff finish, ensuring maximum ease in cleaning and maintaining brilliant appearance.
ASME Code
Unit shall be ASME shop inspected, stamped and registered with the National Board for operation up to a maximum working pressure of 55 PSI.
Sanitation
Unit shall be designed and constructed to meet NSF requirements and be NSF listed.
Steam Pressure
Kettles shall operate dependably at any steam pressure between 5 and 55 PSI. Higher working pressure available.
Performance
Pouring height shall be such that kettle can be emptied into an 8” high pan on a flat table. Design shall make it possible for one person to tilt kettle, even when kettle is filled to capacity. All sizes have full bottom hemisphere steam jacket, for rapid product heating.
Mounting
Kettle shall be mounted on sturdy cast, chrome plated stainless steel arms. The steam supply shall enter through the left kettle support arm, through an integrated steam control valve into the jacket at the rotary joint, down through the support arm. No exposed steam piping shall be on the kettle body.
