Delfield F18WCP 44" WorkTop Refrigerator
Standard Features
- Standard heavy duty units have unfinished ends
- Heavy duty stainless steel top construction
- Stainless steel refrigerated base interior back and bottom
- High density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane insulation keeps energy costs low
- Base fronts are made of ABS plastic backed by rigid polyurethane injection molded frames
- One epoxy coated shelf for each door
- Snap-in dart style vinyl magnetic gasket
- Recessed black plastic handles held in with a positive lock system
- Heavy duty leg rails that run the entire length of the unit
- Electronic control
- 6.12" adjustable full stainless steel legs and bullet feet
- 8' cord and plug supplied
- 36" standard work height
- Environmentally friendly R290 refrigerant refrigerant
- Interior cabinet is cooled with mullion style evaporator blower coils (coated) mounted between each door/drawer section for very even air and temperature control
- Interior refrigerator will maintain 36° to 40° temperatures at 100° ambient room temperature meeting NSF requirements
Specifications
- Exterior top is constructed of one-piece stainless steel, with integral 2.12" (5.4cm) high square nosing at the front, and 4" (10.2cm) high by 2" (5.1cm) deep backsplash at the rear. Top is insulated with 2" (5.1cm) of high-density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane.
- Exterior back and bottom are galvanized steel. Exterior ends are galvanized steel.
- Base interior has stainless steel back and bottom. Interior ends and door frames are thermoformed ABS plastic. Base is insulated with 1.5" (3.8cm) of highdensity foamed-in-place polyurethane. Electronic temperature controls and pre-wired condensing unit with hot gas condensate evaporator are installed in the machine compartment. Electronic control for base reads air temperature. On/Off switches for base are located behind the louvered panel.
- Door(s) have a stainless steel exterior front, with a thermoformed ABS plastic interior liner. Door(s) have black recessed handle(s) and a snap-in magnetic gasket which is easily replaceable. Each interior door section has (1) removable epoxy-coated wire shelf.
- Base has a machine compartment, standard on right, with a condensing unit with condensate evaporator and an electrical junction box installed. Machine compartment has a removable louver for access to condensing unit. Blower coil(s) are located behind the door mullions. Refrigeration system uses HFC-404A refrigerant, and will maintain 36°F (2°C) to 40°F (4°C) interior cabinet temperature.
- Unit is mounted on 6.13" (15.6cm) high adjustable stainless steel legs.
- Refrigeration System: R290 refrigerant, and maintains 36°F (2°C) to 40°F (4°C) interior cabinet temperature. Interior cabinet is cooled with mullion style blower coils (coated) with expansion valves mounted between each door/drawer section for even air and temperature control.
- Electronic temperature controls and pre-wired condensing unit are installed in the machine compartment. Electronic control for base reads air temperature. On/Off switches for base are located behind the louvered panel.
- Electrical connections are 115 volts, 60 Hertz, single phase. Unit has a 8' (2.4m) long cord and plug.
From The Manufacturer
Refrigerated Counter, Work Top, available in lengths of 44" to 95"W & with (1) to (3) doors (see configuration), stainless steel front & top, ABS interior sides, stainless steel floor, unfinished ends & back, with side-mounted self-contained refrigeration, 6.13" adjustable stainless steel legs, R290 Hydrocarbon refrigerant, cUL, UL, NSF,
