Moffat H10D Heated Holding Cabinet, 10-Pan Capacity, Stainless Steel, Glass Door, 1200W, 2-7/8" Tray Spacing

H10D

Unit shall be a Moffat electrically heated Turbofan Holding Cabinet. E.T.L listed and NSF.4 listed. The holding cabinet shall have double skin construction with stainless steel interior and exterior sides, front and top. Door shall be side hinged. Unit shall have capacity for 10 half size sheet pans or 10 12” x 20” steam pans. A single speed fan shall gently and evenly circulate air around the cabinet. Cabinet shall be controlled by a Digital display electronic Temperature and Timer controller. 3 hold timers shall be standard. Holding cabinet shall be mounted on castors, with two rigid castors at rear and two castors, swivel and wheel lock at front. Holding Cabinet shall operate independently or in conjunction with Moffat Turbofan E33D Convection Oven. Holding Cabinet shall be fitted with a NEMA 5-15P cordset. Unit shall be supplied in 100% recyclable shipping packaging.

STANDARD FEATURES

• Designed for individual use or system installed with Turbofan E33D Convection Ovens
• 10 Half size sheet pan capacity
• 10 12” x 20” steam pan capacity
• 2 7/8”/ 74mm tray spacing
• Compact 24”/ 610mm width
• 110-120V plug-in 15A NEMA 5-15P cordset fitted
• 1200W cabinet heating
• Full double skin construction
• Digital display Temperature and Timer controls
• Large easy view 3/4”/ 20mm high displays
• Electronic temperature control
• 3 hold timers
• Continuous door seal
• Low velocity circulation fan system
• Dual halogen cabinet interior lamps
• Cabinet drain to condensate pan
• 4 dia. 3”/76mm castors with 2 front castors with wheel and swivel lock, 2 rigid rear castors
• 100% recyclable packaging