0% Interest for 30 Days
Cleveland FLT0043-KIT for Steam Equipment Water Filtration System
Standart Features
- A total system delivering high quality filtered water with cleaning and deliming capabilities
- Filters incoming water to improve the performance, maximize energy efficiency and increase the life of steam equipment
- Dual cartridge design provides enhanced performance for low or high flow capacity steamers and flexibility for expanding to meet future needs
- Reduces chlorine-induced corrosion
- System is simple to install, operate and maintain
- Service Flow Rate: Maximum 2.5 gpm (9.5 Lpm) single cartridge Maximum 5.0 gpm (18.9 Lpm) dual cartridge
Installation & Operating Tips
- Choose a mounting location suitable to support the full weight of the system when operating.
- Use minimum 1/2" inlet water line (3/4" preferred).
- Connect the system to the boiler water only. Do not connect system to the condenser.
- Install vertically with cartridges hanging down.
- Allow 21⁄2" (6.35 cm) clearance below the cartridge for easy cartridge replacement.
- Flush cartridges by running water through system for five (5) minutes at full flow.
- Change Cartridge on a regular six (6) month preventative maintenance program, when capacity is reached or when pressure falls below 10 psi (0.7 bar).
- Service flow rate must not exceed 2.5 gpm (9.46 Lpm) for single cartridge systems or 5.0 gpm (18.92 Lpm) for dual cartridge systems.
- Always flush the filter cartridge at time of installation and cartridge change.
From The Manufacturer
Hard Water treatment filtration kit with cartridge replacements - Includes (1) FLT0043 Water Filter System with (6) FLT0015 Cartridges
Images show the product series. Color, configuration, included items and accessories vary by model. See the spec sheet for this model.
