Dinex DXP7152P5 Tray & Silver Cart on Wheels, (2) Stack with (5) Pan

Specifications

• DXP715 Series tray and silverware carts for silverware in pans.
• FRAME: The frame is constructed of 1" O.D. 16 ga. stainless steel tubing formed to support an overhead silverware dispenser and to serve as
• push handles at both ends.
• SHELVES: Each shelf is press formed from a single sheet of 18 ga. stainless steel. It is flanged down 1-5/16" on all four sides and formed
• back at a 30º angle for rigidity. Each inside corner is fitted with an ABS black plastic bracket and sleeve to accommodate an upright. The
• bottom shelf on all models is set 8" above the floor. With 10" clearance between shelves on 2 shelf models.
• SILVERWARE DISPENSER: The dispenser is constructed of all welded 18 ga. stainless steel and is securely welded to the top of the tubular
• frame. The tops are canted and are cut out to accommodate 6-3/8" x 10-3/8" x 4" deep stainless steel silverware pans.On eight and ten pan
• capacity models, the silverware dispenser is two tiers high. The silverware pans are furnished as standard.
• CASTERS: The units are mounted on four 4" diameter heavy duty, casters.
• The unit has two shelves and is supplied with five silverware pans on one level.