LTI SPC-RTE/RTS-36 Flatware & Tray Cart
Standart Features
- 30" wide 14 gauge stainless steel top
- Molded fi berglass body
- 5" Casters
Specifications
- Top : Top to be 30” wide and fabricated from a minimum of 14 ga. stainless steel with square turndown on all sides and corners fully welded, ground and polished. Top to have #4 satin fi nish and with all edges having a #7 hi-lite fi nish.
- Body (F) : Body to be seamless molded fi berglass (F.R.P.) with smooth exterior surfaces and rounded corners. To be constructed by a hand lay-up process with four layers of 1.5 oz continuous strand fiberglass mat, plus a 24 oz layer of woven roving on the bottom for added strength. Fiberglass to be fl ame retardant per specification ASTM E-162 having a fl ame spread of 25 or less. Body interior to be reinforced at each end with 4 wide, 12 gauge galvanized channels welded to form integral U frame for maximum stress relief.
- Casters : 5” diameter, ball bearing, swivel type casters to be non-marking and with brakes on all wheels. Casters to be mounted thru two 12 gauge channels for extra rigidity.
From The Manufacturer
SpecLine Tray Stand, step down, 36-3/8"W x 30"D x 36"H, 14ga stainless steel top, specify base, 5" casters all with brakes, UL, cUL, UL EPH (contact factory for price)
