0% Interest for 30 Days
LTI GAB-84 Molded Fiberglas Grab-a-Bag Cart - 84-3/8" x 30" x 60"
Features
- Insulated Well 3-Pan Capacity to Accommodate Hot/Cold Items
- Double-Sided Service, 2-Tier Sloped Overshelf (14-gauge Stainless Steel)
- Stainless Steel Push Handle
- Available in Black, White, Regal Blue, & Candy Apple Red
- 5” Casters with Brakes on All Wheels
Specifications
- Top to be 30” wide and fabricated from 14-gauge stainless steel with square turndown on all sides and corners fully welded, ground and polished. To have #4 satin fi nish with all edges having #7 hi-lite fi nish.
- Body to be seamless molded fi berglass (F.R.P.) with smooth exterior surfaces and rounded corners. To be constructed by a hand lay-up process with four layers of 1.5 oz continuous strand fi berglass mat, plus a 24 oz layer of woven roving on the bottom for added strength. To be fl ame retardant per specifi cation ASTM E-162 having a fl ame spread of 25 or less. Body interior to be reinforced at each end with 4” wide, 12-gauge galvanized steel channel welded to form integral “U” frame for maximum stress relief. The ice cooled cold pan shall be of 18-gauge stainless steel and be 6” deep. The welded watertight pan to be double wall construction, fully insulated with urethane insulation with sectional, removable false bottom. A full perimeter plastic laminate breaker strip shall separate the top from the cold pan. Option 1- Stainless steel insulated Milk Compartment accommodates (4) 13”x 13 “ Milk crates (200 milk cartons) with (7) freezer packs. Option 2-Three-well pan to accommodate Hot and Cold items and to have 1” open brass shut-off drain with extension to valve below base.
- 5” diameter x 2” wide, ball bearing, swivel type casters to be nonmarking and with brakes on all wheels. Casters to be mounted with internal and external bracing for maximum stress relief. Standard cart will have double-sided Two-Tier sloped overshelf 14 gauge stainless steel.
- The tray slides shall be 16-gauge stainless steel, 8” wide with edges turned down square and all corners fully welded, ground and polished. Support brackets to be adjustable 14-gauge stainless steel fold down type. Bracket to have the ability to be adjusted for ¼” in height and leveling.
From The Manufacturer
Grab-a-Bag Cart, 84-3/8"W x 30"D x 60"H, 14 gauge stainless steel top, 84" molded fiberglass body, stainless steel push handle welded to top, adaptor bars, 14 gauge 2-tier sloped over-shelf, double service, 5" casters with brakes on all wheels
