Credit Key
Vollrath FC-4C-04120-F 55" Stainless Drop-in Frost Top
Description
- Vollrath’s Refrigerated Frost Tops keep pre-chilled food such as grabn-go menu items, trays of appetizers and cold beverages at proper serving temperature and provide easy, self-serve access.
- For best performance, stainless steel pans are recommended.
- The display surface fits flush with the countertop to limit the effect of ambient temperature on the display area and to help maintain the fullfrost pattern.
Features
- Flange and display are 300 series stainless steel
- Uses R513A, a non-flammable low Global Warming Potential (GWP) refrigerant
- Frost top display area is one-piece construction
- Designed for top-mount installation, flush with countertop
- A full-perimeter drip edge contains spills and condensation
- Gasket included for installation under drip-edge
- Refrigeration coils are attached to the underside of the display surface to provide maximum cooling. Additional coils are attached to the sides of the display to create a full frost pattern.
- Extruded polystyrene insulation surrounds the cooling coils and directs the thermal exchange to the display area for minimum energy output and lower cost operation
- Display surface averages 0 °F (-18 °C) at 70 °F (21 °C) ambient temperature
- ½" (1.27 cm) integral drain
- Condensing unit suspended below the top
- Remote On/Off switch with 4 ft. (122 cm) cord
- 6 ft. (183 cm) cord with plug, does not require hard wiring
Clearance Requirements
- Zero clearance installation on all sides and 4½" (11.4 cm) clearance from the condenser air inlet and outlet openings
- Indoor use only. Room temperatures and HVAC can effect performance temperatures.
- For best performance, prevent drafts and room air currents from passing over the display surface.
- Requires a minimum of 80 square inches for fresh air intake and a minimum of 80 square inches for exhaust. See back page for details.
From The Manufacturer
Frost Top, Drop-In, self-contained refrigeration, 4-pan, 300 series stainless steel, recessed drip flange with drain, remote on/off switch, 1/3 hp compressor, 120v/60/1-ph, 7.8 amps, NEMA 5-15P, overall dimensions: 54-3/4" x 26-1/16", cutout dimensions: 54" x 25-1/4", display area length: 48-3/4", cULus, NSF, Made in USA (contact Vollrath for lead time) (Refer to vollrathfoodservice.com for full warranty policy)
Images are for reference. Color, configuration, dimensions and what's included vary by model. See the spec sheet to confirm the exact details.
