0% Interest for 30 Days
The Delfield N8630P Drop-In Self-Contained Hot & Cold Combination Pan
Why Use Delfield's Drop-In?
Safety and Sanitation
UL and NSF - All Delfield Drop-in products are UL approved and NSF certified. Which means you can count on safe, consistent construction and performance every time.
Convenience
Delfield Drop-in products are easy to install into any new or existing counter. A press fit flange gasket comes pre-installed making the units ready to drop-in immediately.
Quality
Delfield Drop-in products have an unmatched level of quality. The units are reliably built by the best in the industry and come standard with a 90-day labor and 1-year parts warranty
Construction
Delfield Drop-in products are constructed with stainless steel tops and
interiors. Cold units are insulated with high-density polyurethane foam
and hot units are insulated with fiberglass.
Refrigeration lines are secured to the liner with stainless steel spot
clips and thermal transfer compound is applied to improve heat transferred
cool the food product better.
Delfield N8630P Standart Features
- High density environmentally friendly, Kyoto Protocol compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam throughout
- N8630P: 30” hot & cold combination pan drop-in
- NSF-4 and NSF-7 certified for hot and cold operation
- Stainless steel immersion heaters
- Remote control panel with 3-way hot/cold/ off power switch and thermostat for hot operation
- Thermostat for cold operation located next to condensing unit
- Adjustable pan support for flush mounted hot operation or 2” recessed cold operation
- 1’’ stainless steel drain with screen
- Stainless steel louver provided
- Push-in flange gasket is standard
- Adaptor bars for 12”x20” pans provided
- Environmentally friendly HFC-404A refrigerant
- Standard 90 day labor and one year parts warranty
- Additional adaptor bars or plates
Delfield N8630P Specification
- Interior: Interior liner is constructed of stainless steel with a 1” (2.5cm) drain. Adjustable stainless steel pan rest for flush mount heating or 2” (5cm) recessed cooling to accommodate up to 6” (15cm) deep 12”x20” pans, supplied by others. Stainless steel immersion heater(s) installed in bottom for wet only heating operation
- Exterior: Exterior body is constructed of galvanized steel with high density environmentally friendly, Kyoto Protocol compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane insulation throughout.
- Refrigeration: Condensing unit is suspended on a galvanized steel frame. Environmentally friendly HFC-404A refrigerant is utilized. Temperature controlled by thermostat located next to condensing unit
- Operation: Remote control panel contains 3-way Hot/Cold/ Off power switch and thermostat for heated operation. As a safety feature, the food well immersion heater includes a high limit safety switch. If the heater gets too hot the safety switch will trip, turn the heater off and illuminate a control panel pilot light.
- Electrical: All units must be hard wired at installation.
- Top: Top is constructed of one-piece stainless steel.
