Crown Direct Steam
2/3 Jacketed Kettle
Stationary or Tilting
SPECIFICATIONS:
Shall be a Crown Models, steam jacketed
kettle models DMT, tilting type, or DMS,stationary type. Kettle shall be
mounted in enclosed cabinet base and interior liner shall be 316 stainless
steel for high acid content products. A double wall kettle interior shall
form a steam jacket around the lower 2/3 of the kettle. The bottom of
the kettle shall be of hemispherical design for superior heat circulation.
A steam control valve and hot and cold water, deck mount fill faucet shall
be mounted on the stainless steel counter top. Kettle shall be equipped
with 2” (50 mm) sanitary draw off with perforated strainer is enclosed
in the cabinet for sanitary purposes. Steam trap and a safety relief
valve are standard. Swing drain for draw-off valve shall be removable
without tools and shall be equipped with removable strainer. DMS &
DMT models shall include a one piece stainless steel spring assist cover.
Cabinet base shall be of modular design to match other Crown cooking
equipment as required and shall be equipped with 6” (152 mm) stainless
steel legs with 4 adjustable flanged feet for securing to the floor. All
stainless steel exterior, # 4 finish, with removable side panels and doors
with magnetic latches.
DMT models shall be equiped with a 1/2 H.P. hydraulic system for tilting
which allows complete emptying of contents. Tilting may be stopped at
any time without kettle tilting back. A standard pan support shall hold
one 12” x 20” x 2-1/2” pan (305 mm x 508 mm x 64 mm), keeping the
pan in a horizontal position throughout the tilting operation and shall be
removable without tools.
The unit shall be ASME Code stamped and National Board Registered
and NSF Certified. DMT models shall also be c-CSA-us certified.
FEATURES:
Stainless steel cabinet
4 Adjustable flanged feet
One piece spring assist cover
2" (51 mm) tangent draw off valve c/w TPS-2 strainer