The Nemco 56050-1 CanPRO Compact Can Opener - Permanent
Why use Nemco Easy Chicken Slicer?
NEMCO’s unique mechanical design thinks outside the can! Instead of
cutting down vertically into the lid, the CanPRO® Compact cuts
horizontally into the rim for improved food safety, as well as operator
safety. Cutting from the outside, the blade assembly crimps as it cuts,
eliminating the sharp edge that can slice a hand or damage a spatula.
Plus, it leaves no metal slivers that can fall into the food contents.
Running the circumference of a #10-sized can just takes a few quick and
easy turns of the crank. It’s adjustable to all can sizes and features a
permanent mount with an optional temporary clamp, allowing you to move the
opener around the kitchen. Security model option offers a locking
capability.
Think Outside the Can
Unlike conventional can openers that puncture and cut down into the lid
from the top, Nemco’s new CanPRO cuts from the side, along the lid’s outer
seam.
The cutter never makes contact with the inside of the can.
No metal shavings fall into the food.
The lid comes off clean with no jagged edges.
Seams So Smooth
As a result of NEW engineering, the compression of the CanPRO’s cutter has
been carefully fine-tuned to improve performance.
The cutter's new design won’t penetrate past the first layer of metal on
the lid’s seam, alleviating the potential for producing metal slivers if
the user overrotates the can.
When the cutter runs its life cycle, it won’t cut at all, clearly
indicating it should be replaced.
Cut and Run and Keep Running
The NEW CanPRO is specially designed to minimize downtime and costly
repairs. Remove the cutter housing assembly and clean with brush. Then
simply clean the rest of the unit in the dishwasher or your 3-compartment
sink.
No more gear breakage or wear, thanks to a completely gearless handle.
The cutter housing is a quick-change module— switch out a used for a new
with just a pull of a pin. Keep an extra new modular cutter on hand, and
you’re never down.
Stainless steel and aluminum nickelplated components translate into a
long, virtually maintenance-free life.