Listening to our customers is what we do best. They have inspired us, our engineering and manufacturing teams to design,
refine and build walk-ins that meet their highest expectations, while delivering them in a competitive timeframe. Our panel raw
materials and hardware components are of the finest quality in the industry. We can build a walk-in refrigeration system that
meets the most demanding customer requirements, and provide piece-of-mind that your investment will last a lifetime.
PANELS AND INSULATION:
PANEL CONSTRUCTION : Dynasty modular wall, floor and ceiling panels are fabricated in our plant using state-of-the-art
robotic manufacturing and assembly processes; for precise fit, easy assembly and long life. Dynasty
panels are 4” thick and manufactured with 100% uniform AK-XPS4 rigid foam. That insulation is
permanently bonded to primed metal surfaces, to form a non-deteriorating structurally-rigid panel.
Dynasty panel assembly is accomplished with a time-tested, corrosion resistant cam action locking
system, and a factory installed NSF compliant compression gasket, to form rigid, airtight joints.
STANDARD PANEL FINISH: Dynasty wall and ceiling panel interiors and
exteriors are laminated with 26-gauge zincaluminum (Acrylume®) coated steel, which is
stucco embossed and coated with corrosion
resistant acrylic paint.
INSULATION PERFORMANCE CHARACTERISTICS: AK-XPS4 rigid foam is a closed cell, void-free hydrophobic (water-resistant) material that
maintains the highest possible R-value over time, to ensure long term energy efficiency. AKXPS4 meets and exceeds the EISA Energy Independence & Security Act of 2007 with R-29
value for Coolers and R-32 value for Freezers. Our AK-XPS4 insulation is backed by The Dow
Chemical Company with a 50 year thermal warranty.
STANDARD FLOOR: Dynasty floor panels are also 4” thick and
manufactured using heavy gauge smooth
aluminum, rated to support 600 pounds persquare-foot of uniformly distributed floor
load. They include a 1/2”-radius cove along
the interior perimeter, to make cleaning
easier. Floorless walk-ins are provided with
NSF approved floor screeds, to sit flat on an
existing leveled floor.
STANDARD DOOR CONSTRUCTION
:
FLUSH DOOR HARDWARE: Standard door sizes are: 36”, 30” or 26” wide, all with a 76” high clear opening. Doors are constructed with 4” thick AK-XPS4 rigid foam insulation and finished with 26-gauge zinc-aluminum (Acrylume®) coated steel, which is stucco embossed and coated with corrosion resistant acrylic paint.
Each door includes: two heavy duty, super cam-rise spring-assisted hinges; a heavy pull handle with key lock and
inside safety release; and a door closer is provided for extra positive smooth closing. To ensure a positive seal,
the door includes a three sided magnetic gasket and a flexible double wiper at the bottom edge of the door.
INSTALLATION KIT: We designed our panels so that
job-site installation is fast and
easy. All walk-ins are shipped
with a hardware and installation
instruction kit that includes: the
shop drawing, detailed installation
instructions, hex wrench for camlock panel assembly, PVC press fit
caps and the light globe.
DOOR JAMB: The door jamb and door are constructed with a non-conductive heavy-duty PVC extrusion that provides
a thermal barrier. The jamb includes an incandescent vapor-proof light fixture mounted on the center/top
of the jamb, which provides extra space for shelving posts. A digital LED Thermometer (F0
/C0
) is provided,
with On/Off pilot light switch.
Dynasty Freezer doors are equipped with a heated pressure relief vent mounted on the door jamb. In
addition, the doors include a temperature controlled heater wire to ensure a positive frost free seal.