BevLes HTSS60P121 3/4 Size Heated Holding Cabinet, Narrow Width, 115V

Why Use Bevles Heated Holding Cabinet?

Temper Select cabinets are constructed of stainless steel inside-and-out, and feature fully insulated top, side, and doors. Top mounted convection heating system produces uniform temperature distribution down both sides and features solid state controls with a temperature range of 70° to 215°F (21° to 102°C). Standard features include field reversible, lift-off, self-closing hinges, magnetic door gasket and latch, cool-touch handles and turn-knob locking device, radius corners, front and rear pull grips, heavy-duty plate casters with 5” (127mm.) rubber wheels and water pan for added moisture. Options include left or right hand hinges, 120v, or 208/230v 15 amp service and more. "P" models have solid non-adjustable racks that can be used on 1.5" spacing. "W" models have universal adjustable wire pan supports that can be adjusted on 1.5" centers.

Bevles HTSS60P121 Features

• Temperature adjustable from 60°F (15.6°C) to 215°F (102°C) for heating and holding a variety of foods
• Top mounted convection heat and humidity system maintains even cabinet temperatures and ensures quick pre-heating and rapid recovery
• Solid state controls provide the highest degree of accuracy and reliability, prepared foods are held at a consistent serving temperature
• Fully insulated cabinet prevents heat loss and keeps foods hot and ready to serve, side air tunnel system circulates air evenly throughout the cabinet with minimal heat loss when doors are opened
• Removable top water pan provides additional humidity for hard to hold items
• Completely removable interior components for quick and easy cleaning
• Pan slide assemblies hold 18 x 26 sheet pans, optional welded wire screens accept 12 x 20 steam table pans
• All stainless steel & aluminum construction
• Heavy-duty plate-type casters with 5" hardneoprene wheels, front two with brakes
• Heavy duty field reversible doors with self closing lift off hinges and magnetic latches
• Magnetic door gaskets
• Recessed stainless steel side mounted (front and rear) pull grips provide easy mobility
• 120V, 15A, 1PH service standard NEMA 5-15P

Bevles HTSS60P121 Specifications

Construction, Casters and Heating Module

• Exterior 20 ga 304 #3 finish stainless steel
• Interior 22 ga 304 2B finish stainless steel
• Exterior door panel 20 ga 304 #3 stainless steel
• Interior door panel 22 ga 400 BA finish stainless steel
• Internal framework 18 ga 304 stainless steel
• Full insulated doors, back, sides, top and base
• Latch Heavy duty magnetic door latch with cool-totouch handle and turn knob lock
• Hinges Heavy duty lift off self-closing, chrome plated
• Door Gasket Magnetic NSF approved Santoprene
• Base: .125 Formed aluminum with welded corners
• Side air ducts 22 ga 304 2B Stainless steel
• Pan Supports welded wire 304 stainless steel pan supports adjustable on 1.50"centers
• Top mounted dual coil heating unit , heating elements rated at 600 watts @120v, or 1000 watts @ 208-230v
• Easy to operate controls feature 20 amp rated rocker switch, and pilot light, precision variable thermostat, 2" dial thermometer
• Cord and Plug: 8' cord with 15A molded plug (NEMA 5-15P); 208/230 volt models provided with cord only
• Heavy-duty plate type casters, with 5" hard neoprene wheels; all swivel, with wheel brakes on front two casters

Bevles HTSS60P121 Options and Accessories

• Left hand door hinging
• Stainless steel push handles
• Magnetic latch with key lock
• Corner bumpers of gray non-marking vinyl (set of 4)
• Perimeter bumper of gray non-marking vinyl
• Additional universal pan supports
• 6" stainless steel legs with adjustable feet for stationary floor installation*
• 6" casters with soft rubber wheels
• 18" x 26" chrome electroplated wire racks
• 208-230-50/60Hz electrical service

* Note: Modifications involving casters or legs may affect the height of the equipment. Specifications subject to change without notice