BevLes PHC60-24INS-A-1R1 3/4 Size Insulated Proofing & Holding Cabinet, Right Hinged, 1 Door, 115V

BevLes PHC60-24INS-A-1R1 3/4 Size Insulated Proofing & Holding Cabinet, Right Hinged, 1 Door, 115V


BevLes PHC60-24INS-A-1R1 3/4 Size Insulated Proofing & Holding Cabinet, Right Hinged, 1 Door, 115V

Disclosure The image above may not exactly represent the product

Special Price $4,493.63

Call or Chat Call or Chat

Proofing & Holding Cabinet, mobile, 3/4 height, insulated top, back & sides, (1) clear Lexan® right-hand hinged door, digital thermostat, variable humidity control & LED display, 80° to 180°F temperature range, adjustable aluminum pan supports on 1-1/2" centers accommodate (12) 18" x 26" or (24) 12" x 20" pans, removable heating module, 5 qt. cast water reservoir with cover, 5" swivel plate casters (2 with brakes), aluminum construction, 120v/60/1-ph, 2000 watts, 16.7 amps, 8' cord & NEMA 5-20P, cULus, NSF

BevLes Company PHC60-24INS-A-1R1 Specs

Brand BevLes Company
Model Number PHC60-24INS-A-1R1
Weight 260 lbs
Width 29"
Depth 33.5"
Height 56.5"
Sections 1 section w/1 compartment
Doors full height doors, plastic
Exterior Finish all aluminum exterior
Interior Finish aluminum interior
Heater bottom mounted heater
Slide Centers adjustable centers on 1-1/2"
Insulation insulated

The Bevles PHC60-24INS-A-1R1 Proofing and Holding Cabinet Insulated

Why Use Bevles Proofing Cabinet?

BevLes Combination Holding & Proofing cabinets are all aluminum construction and are available in insulated and non-insulated models. Universal extruded pan supports accommodate a wide variety of pans and screens while see-through Lexan doors with heavy-duty hinges feature positive closing latches and full perimeter gaskets.User-friendly, bottom-mounted controls feature independent heat and humidity adjustment. Temperatures range from 80° to 180°F (27° to 82°C) and the water reservoir holds up to 5 quarts (4.7 liters). Bevles "cast-in" humidity system prevents element burnout while providing added safety for the operator. All BevLes proofing and holding cabinets have a self-draining feature for excess moisture collection below the cabinet base into a standard 18"x26" bun pan - pan not included. Heavy-duty swivel-type plate casters with 5" (127mm.) rubber wheels, two with locks, provided.

Bevles PHC60-24INS-A-1R1 Features

  • Self-draining feature collects excess moisture into a standard bun pan (not included) below the base of the cabinet
  • "Cast-in" humidity system prevents element burnout from water spills and potential injury from accidental contact with exposed heating element
  • All aluminum construction
  • Insulated top, sides and back
  • Extruded pan supports accept a variety of pans and screens
  • Removable heating module with separate controls for heat and humidity
  • Maintains uniform temperature and humidity throughout cabinet
  • Temperature adjustable from 60°F (15.6°C) to 180°F (82.2°C)
  • Completely removable interior components for quick and easy cleaning
  • Heavy-duty plate-type casters with 5" hardneoprene wheels, front two with brakes
  • 120V, 20A, 1PH service

Bevles PHC60-24INS-A-1R1 Specifications

Cabinet, Casters and Electrical

  • Body: .063 Formed aluminum
  • 1.50" Thick insulation Top, back, and sides
  • Door: Clear Lexan® with an extruded aluminum frame
  • Door Latch and Hinges: Positive action door latch with heavy-duty stainless steel hinges
  • Door Gasket: Closed cell foam
  • Base: .125 Formed aluminum
  • Rear (Air Duct) Panel: .063 Formed aluminum
  • 20 Amp Switch, and pilot light
  • Pan Supports: Aluminum pan supports adjustable on 1.50"centers
  • Cord and Plug: 8' cord with 20A molded plug (NEMA 5-20); 208/230 volt models provided with cord only
  • Heavy-duty plate type casters, with 5" hard neoprene wheels; all swivel, with wheel brakes on front two casters

Heating Module and Controls

  • Bottom mounted heating unit with a one (1) piece modular drop-in design blower assembly, easily removable for maintenance and cleaning
  • Air heating element rated at 1600watts
  • Humidity heating element rated at 400 watts
  • 5 quart (4.7 liter) cast waterreservoir
  • Lexan® water reservoir cover
  • Easy to operate controls feature digital thermostat, variable humidity control and LED display
  • All controls are visible and operable from exterior of cabinet

Bevles PHC60-24INS-A-1R1 Options and Accessories

  • Door hinging
  • Solid doors
  • Dutch doors (2)
  • Corner bumpers of gray non-marking vinyl (set of 4)
  • Additional extruded universal pan supports
  • Perimeter bumper of gray non-marking vinyl
  • 6" stainless steel legs with adjustable feet for stationary floor installation*
  • 5" casters with hard neoprene or polyurethane wheels
  • 18" x 26" chrome electroplated wire racks

* Note: Modifications involving casters or legs may affect the height of the equipment. Specifications subject to change without notice

Write Your Own Review
You're reviewing:BevLes PHC60-24INS-A-1R1 3/4 Size Insulated Proofing & Holding Cabinet, Right Hinged, 1 Door, 115V
Your Rating