Comstock-Castle 2932DF Donut Fryer
|Exterior Finish||all stainless steel exterior|
|Maximum Fat Capacity (approximate)||20 - 50 lb|
|Fry pot||stainless steel|
Easy cleaning, corrosion resistant stainless steel finish, welded with aluminized inner framing. Double wall construction with heavy insulation combined with a special flue design for cooler operation. Adjustable 4˝ stainless steel legs for easy leveling. Installation clearances for non-combustible surfaces are 2˝ on sides and 6˝ in the rear, combustible surface clearances are 6˝ and 6˝. Hinged front door panel protects controls.
Snap Action thermostat for fast recovery, 100% safety shut off, high limit control for back-up safety, automatic standing pilot and brass burner valves. Pressure regulators are set at the factory for natural gas and easily convertible to propane. Optimal pressures are 4˝ WC for natural gas and 10˝ WC for propane. Manifold size is ¾˝ NPT. All controls are tested and confirmed in good working order. Calibration and adjustments are the responsibility of the installer. Gas outlet located 2" from the right side as viewed from the front.
Long life, cast iron “H” pattern burners combined with a special “V” shaped tank design directs heat for excellent air circulation.
Easy cleaning, corrosion resistant stainless steel with angled bottom ¾˝ gate valve for rapid draining.
Single large baskets, stainless steel tank covers, gas hoses, cleaning supplies, equipment stands and casters are listed in the price list.
Tubular stainless steel legs and stainless steel stabilizing under shelf to bring the tank surface to 36˝.
Flat Bottom Funnelcake-Blooming Onion Fryer, countertop, gas, 32" wide, 27-60 lb. fat capacity, snap action thermostat, stainless steel tank, front & sides, 4" adjustable stainless steel legs, 75,000 BTU, NSF,