Resources
Certifications
Brand | Continental Refrigerator |
---|---|
Model Number | D1FXSNSSHD |
Weight | 515 lbs |
Width | 36.25" |
Depth | 29.5" |
Height | 86.75" |
Door Type | solid |
Size | 1 section |
Capacity | 10 - 23 cu. ft. |
Exterior Finish | stainless steel |
Compressor HP | 1/2 HP |
Compressor Location | top mounted |
Refrigerator Type | Reach-In |
Door Quantity | 2 |
Interior Finish | stainless steel |
Capacity (Cu. Ft.) | 32 |
Supports | legs |
Door Style | half hinged, wide |
Certifications | cETLus, NSF |
Continental Refrigerator has one of the most diversified commercial Reach-In product lines in the industry with standard features not found on other units. Continental Refrigerator's Designer Line models are equipped with both top and side air distribution ducts which allow for constant, uniform temperature throughout the cabinet.
A “performance rated”, air cooled, hermetically sealed, capillary-type refrigeration system is installed on the top of each freezer. Plasticized fin coil and air circulating fans are contained within a concealed “plug” type insulated housing, readily accessible on the top of the cabinet and separate from the food zone to increase food storage capacity. The entire “plug” system is fully charged with refrigerant and mounted on a sturdy steel, rail-type base which can be easily removed if refrigerator conversion is desired. Freezers are designed to maintain 0° Fahrenheit (-18° Centigrade) while operating with an unrestricted air supply in a maximum ambient temperature of 100° Fahrenheit. Automatic electric defrost timer initiates defrost cycles at predetermined intervals. All condensate water is evaporated by an automatic non-electric, corrosion-resistant condensate evaporator. A strict quality-assurance team inspects all materials and components to certify that each model conforms to the most exacting standards. All models are factory performance tested for a minimum of 16 hours prior to crating.
All materials are of top quality, assembled to conform with strict quality-assurance requirements. The cabinet front is constructed of heavy-gauge polished stainless steel for durability. All cabinet joints and seams are sealed vapor-tight. Case is of all metal, welded construction and internally supported and braced for a rigid unit construction. Cabinet design eliminates overlapping panels with raw edges. Cabinet body is insulated with non-CFC, foamed-inplace polyurethane foam with an average thickness of 3 inches to ensure increased energy efficiency. Fulllength louvered air grille located above the doors allows equal air circulation to the condensing unit. Easily removable, low wattage, anti-sweat door heaters concealed by a non-metallic, non-conductive, high impact thermal breaker strip eliminates condensate build-up on the cabinet front. Fluorescent lighting is activated by an easily accessible interior switch. Cabinets are equipped with 6-inch adjustable stainless steel legs.
Shelves are designed for heavy-duty use with .306" diameter frame and brace members and .140" diameter fill wires spaced 3 /4" apart. Shelves are welded steel and epoxy-coated for a durable, long, rust-free service life. Adjustments are in 1 /2" increments and a wide door opening allows the use of a variety of optional pan and tray slide types.