Continental Refrigerator D3RFFENSAHD 85" 3-Section Reach-In Refrigerator Freezer w/ 6 Solid Half-Doors
|Certifications||cETLus, Made in USA, NSF|
|Doors||half-size hinged solid, wide|
|Exterior Finish||all stainless steel|
|Compressor HP||dual temp 1/4 & 1/2 HP|
|Depth (front - back)||standard|
|Compressor Location||top mounted compressor|
Continental Refrigerator has one of the most diversified commercial Reach-In product lines in the industry with standard features not found on other units. Continental Refrigerator's Designer Line models are equipped with both top and side air distribution ducts which allow for constant, uniform temperature throughout the cabinet.
Two “performance rated”, air cooled hermetically sealed, capillary type refrigeration systems are installed on top of each dual temp. Plasticized fin coil and air circulating fans are contained within each concealed “plug” type insulated housing, readily accessible on the top of the cabinet and separate from each food zone to increase food storage capacity. Both “plug” systems are fully charged with refrigerant and mounted on a sturdy steel, rail-type base which can be easily removed. Refrigerator sections are designed to maintain 38 to 40 degrees Fahrenheit (3 to 5 degrees Centigrade), and Freezer sections 0 degrees Fahrenheit (- 18 degrees Centigrade) while operating with an unrestricted air supply in a maximum ambient temperature of 100 degrees Fahrenheit. Freezer “Plug” systems have an automatic electric defrost timer which initiates defrost cycles at predetermined intervals. All condensate water is evaporated by an automatic, non-electric, corrosion-resistant condensate evaporator. A strict quality-assurance team inspects all materials and components to certify that each model conforms to the most exacting standards. All models are factory performance tested for a minimum of 16 hours prior to crating.
All materials are of top quality, assembled to conform with strict quality-assurance requirements. The cabinet front and doors are constructed of heavy-gauge polished stainless steel for durability. All cabinet joints and seams are sealed vapor tight. Case is of all metal, welded construction and internally supported and braced for a rigid unit construction. Cabinet design eliminates overlapping panels with raw edges. Cabinet body, doors and plug are insulated with nonCFC, foamed-in-place polyurethane foam with an average thickness of 3 inches to ensure increased energy efficiency. Full-length louvered air grille located above the doors allows equal air circulation to the condensing unit. Easily removable, low-wattage, anti-sweat door heaters concealed by a non-metallic, non-conductive, high-impact thermal breaker strip eliminate condensate build-up on th cabinet front. Automatic interior lighting is controlled by door openings. Cabinets are equipped with 6-inch adjustable stainless steel legs.
Shelves are designed for heavy-duty use with .306" diameter frame and brace members and .140" diameter fill wires spaced 3/4" apart. Shelves are welded steel and epoxy-coated for a durable, long, rust-free service life. Adjustments are in 1/2 increments and a wide door opening allows the use of a variety of optional pan and tray slide types.
Door shells are constructed of heavy gauge stainless steel and are internally braced and urethanefoamed-insulated for rigidity. Door corners are of welded construction and polished. REplaceable snap-in gaskets are self-adjusting, heavy-duty, magnetic type. Door handles and hinges are chrome-plated and non-corrosive. Doors are provided with built-in cylinder locks which are keyed alike. Hinges are cam action, lift-off type featuring positive safety stop at 120 degrees.