Shall be a Crown Models,
direct steam connected, pedestal base kettle. A double wall
kettle interior shall form a steam jacket around the lower 2/3
of the kettle. The bottom of the kettle shall be of hemispherical
design for superior heat circulation.
Construction shall be all welded satin finish stainless steel,
type 304. The liner shall be standard 316 for high acid content
Convenience features shall include 2” (50mm) sanitary drawoff valve with perforated strainer and a spring assist hinged
counterbalanced stainless steel domed cover. Includes faucet
DMT models shall be equiped with a 1/2 H.P. hydraulic system for tilting
which allows complete emptying of contents. Tilting may be stopped at
any time without kettle tilting back. A standard pan support shall hold
one 12” x 20” x 2-1/2” pan (305 mm x 508 mm x 64 mm), keeping the
pan in a horizontal position throughout the tilting operation and shall be
removable without tools.
The unit shall be ASME Code stamped and National Board Registered
and NSF Certified. DMT models shall also be c-CSA-us certified.