Shall be a Crown Models , selfgenerating, electric tilting full jacket kettle, low height. A double
wall kettle interior shall form a steam jacket around the kettle.
The jacket enclosure shall contain distilled water which is factory
sealed. The bottom of the kettle shall be of hemispherical design
for superior heat circulation.
The console shall be drip proof, stainless steel clad and shall
be supported on all welded 1-5/8” (41 mm) diameter stainless
steel pipe frame and the legs fitted with 4 hole adjustable feet
for securing to the floor.
The kettle shall pivot on trunnion connected to the tilt mechanism
and the out-bore bearing connected to the frame and shall permit
the kettle to tilt forward a full 90̊ for complete emptying. The tilt
mechanism shall be self locking for positive stop action.
Construction shall be all welded #4 finish stainless steel, type
304. The kettle liner shall be standard with type 316 for high
acid content cooking. The controls shall be integrally mounted
and shall include a power switch, thermostat, pilot light, low
water light, vacuum/pressure gauge, safety relief valve , and
low water shut off.
The kettle shall be standard with removable elements. The
kettle shall operate in a temperature range of 165°F to 285°F
(74°C to 140°C) at a maximum pressure of 50 psi (345 kPa).
The image above may not exactly represent the product
