Crown Direct Steam Kettles
on Electric Cabinet Base
Shall be a Crown model EMT-10-10, consisting of two
direct connected steam, tilting kettles, 10 gallon (23 litre). A
double wall kettle interior shall form a steam jacket around
the lower 2/3 of the kettle. The bottom of the kettle shall
be of hemispherical design for superior heat circulation.
The kettle interior shall be of 316 stainless steel for high
acid content products. The stainless steel mounting legs
shall have the steam supply and condensate within the
legs and the right leg fitted with a steam control valve for
the kettle. Each kettle shall be fitted with a tilt handle and
heat proof knob, allowing the kettles to be tilted forward
90° for complete emptying.
The kettles mounted on a cabinet base with full perimeter
angle frame, reinforced counter, hot and cold water faucet
with control valves, 3” (76 mm) deep sinks with drain and
splash guard, boiler mountings, CSD-1 boiler controls,
nickel plating, automatic boiler blowdown, split water
line, hinged doors with magnetic catches, removable side
panels and 6” (152 mm) stainless steel legs fitted with
4 adjustable flanged feet for securing to the floor, all #4
stainless steel exterior. Steam manifold canceled within
cabinet fitted with steam trap and safety relief valve.