Shall be a Crown Models ,
self-generating, electric, full jacket, low height pedestal kettle. A double
wall kettle interior shall form a steam jacket around the full kettle. The
jacket enclosure shall contain distilled water which is factory sealed.
The bottom of the kettle shall be of hemispherical design for superior
heat circulation.
The pedestal base shall have four, 7/16” holes evenly spaced for
securing unit to the floor.
Construction shall be all welded #4 finish stainless steel, type 304. The
interior liner shall be standard with 316 stainless steel for high acid
content cooking. The controls shall be integrally mounted and shall
include a power switch, thermostat, pilot light, low water light, vacuum/
pressure gauge, safety relief valve, and low water shut off. Faucet
bracket standard.
The kettle shall be standard with removable elements. Convenience
features shall include a 2” (50 mm) draw-off valve and a spring assist
hinged stainless steel domed cover. The kettle shall be ASME Code
stamped, National Board Registered, c-CSA-us and NSF certified.
The kettle shall operate in a temperature range of 165̊F to 285°F (74°C
to 140°C) at a maximum pressure of 50 psi (345 kPa).
The image above may not exactly represent the product
