Shall be a Crown Model GCTS-16, gas fired counter tilting
skillet. The skillet shall be of one piece coved corner, 10 gauge
type 316 stainless steel with a #4 exterior finish, a polished
interior with etched gallon markings an coved corners for
ease of cleaning. Cooking surface shall be of 3/4” triple-ply
construction with 3/8” thick aluminum core ensuring even heat
distribution over the entire cooking surface. Pan shall be fitted
with side pivots mounted in sealed stainless steel clad consoles
mounted on a 10 gauge stainless steel base with #4 finish. Pan
shall be fitted with a stainless steel tilt handle with heat proof
knob to tilt the pan forward for complete removal of contents
and will include a damper control for tilt and return movements
for ease of tilting. A tilt interlock shall prevent inadvertent tilting
of the pan. Controls shall be integrally mounted and shall
include a power switch, solid state thermostat, temperature
pilot light,electronic ignition, ignition light, and a high limit
temperature cut-off. Burner turns off automatically when pan
is tilted. The skillet shall operate in a temperature range of
100°F to 450°F (38°C to 232°C).The skillet can be mounted
on a 30-1/2”(775 mm) wide stainless steel stand with sliding
drain pan and stationary drain.