Shall be a CROWN Model GL-40FE , gas fired self-contained,
full jacket steam kettle, AGA, CGA and NSF Certified, ASME
code stamped and National Board registered. The kettle shall
be constructed with an exterior of type 304 stainless steel,
#4 sanitary finish and 6” (152 mm) stainless steel legs fitted
with flanged adjustable feet. The burners shall be of stainless
steel high efficiency atmospheric tubular design and easily
serviceable. The interior kettle liner shall be a one piece all
welded construction of type 316 stainless steel with # 4 sanitary
finish, and shall be furnished with a 2” (50 mm) draw-off valve
with perforated strainer and a spring assist stainless steel cover
as standard. The recessed control panel shall be located on
the front side of the unit in full view of the operator and easy to
use. Standard controls shall include electronic ignition, direct
immersion thermostat, water sight glass, cooking pilot light,
vacuum/pressure gauge and low water indicator light. Safety
features shall include a low water cut off, pressure relief valve,
pressure control and 100% safety gas shut-off valve. The kettle
shall operate in a temperature range of 165°F to 275°F (74°C to
135°C) at a maximum pressure of 50 psi (345 kPa).
FEATURES:
Low water level cut-off and indicator.
Pressure gauge.
Temperature control.
Safety relief valve.
Integrally mounted controls.
2” (50 mm) draw-off valve with perforated strainer
The image above may not exactly represent the product
