Crown GLT-20 Tilting Gas Kettle

Crown GLT-20 Tilting Gas Kettle

My Account Hello, Guest
Login or Register

Crown GLT-20 Tilting Gas Kettle

Disclosure The image above may not exactly represent the product


Call or Chat Call or Chat

Tilting Kettle, gas, 20 gallon capacity, 2/3 jacket, thermostatic control, electronic ignition, crank tilt, direct immersion thermostat, water sight glass, cooking & ignition indicator lights, pressure gauge, low water shut-off & indicator light, pressure switch, pressure relief valve, gas shut-off valve, faucet bracket, 316 stainless steel interior liner, stainless steel exterior, console & 1-5/8" diameter legs, flanged feet, 80,000 BTU, CSA Star, CSA Flame


Product PDF

Crown GLT-20 Specs

Brand Crown
Model Number GLT-20
Weight 700 lbs
Width 48.13"
Depth 40.63"
Height 40.13"
Capacity 18 - 26 gallon
Kettle Liner 316 stainless steel
Kettle Jacket partial jacket

Crown Gas Steam Tilting Kettle


  • Shall be a Crown Models, self-contained, gas fired, steam jacketed kettle, ASME Code stamped, National Board Registered, AGA, CGA and NSF certified for operation up to 50 PSI. A double wall interior shall form a steam jacket around the lower 2/3 of the kettle. The jacket enclosure shall contain factory sealed, distilled water. The kettle interior shall be stainless steel, type 316 for high acid content cooking. Kettle exterior is fully insulated. The bottom of the kettle shall be of hemispherical design for superior heat circulation. The recessed control panel is located on the front right of the unit, in full view of the operator and easy to use. Standard controls include direct immersion thermostat for operation at a temperature range of 165°F to 275°F (74°C to 135°C) at 50 psi, water sight glass, cooking light, pressure gauge and electronic ignition with ignition indicator light. Comes standard with 3 piece split faucet bracket. Safety features include low water shut off with indicator light, pressure switch, pressure relief valve and a 100% safety gas shut off valve.
  • The kettle shall pivot on trunnions connected to the tilt mechanism and control consoles. The tilt mechanism shall allow the kettle to tilt past 90° for complete emptying. The console shall be drip proof, stainless steel clad and shall be supported on all welded, 1-5/8” (41 mm) diameter stainless steel legs with flanged feet for securing to the floor.
Write Your Own Review
You're reviewing:Crown GLT-20 Tilting Gas Kettle
Your Rating