Crown Steam Coil
Compartment Steamer
with Cabinet Base
SPECIFICATIONS:
Shall be a Crown models,
pressure compartment cooker with steam coil steam boiler,
c-CSA-us and NSF Certified, ASME code stamped and
National Board registered. The cooker shall be constructed
of all-welded type 304 #4 finished stainless steel. The doors
shall have a removable inner liner of aluminum plate with full
perimeter gasket seal, an outer shell of one piece welded
stainless steel, and a wheel-and-screw closing mechanism.
The doors, with a clear opening of 10-1/4” x 26-3/8” (260 mm
x 670 mm) shall latch upon closing and open 180° upon latch
release. Compartment operation shall be at a maximum pressure of 6 psi (41 kPa). Each compartment shall be provided
with universal pan supports. Each optional sliding shelf will
support two full size (1/1 gastronorm) pans.
The control housing shall be constructed of #4 finish stainless
steel with a full-access removable panel. Each compartment
shall be independently controlled by an automatic timer control with visible and audible signals. At the end of the cooking
cycle, the controls automatically shut off and exhaust the
incoming steam, drain the condensate from the compartment,
and sound a continuous audible signal until turned off manually. Standard features include a water treatment system,
automatic boiler blow down, and split water line.
The compartment cooker shall be mounted on a cabinet base
with full perimeter angle frame, reinforced counter, steam coil
boiler complete with controls, hinged doors and 6” (152 mm)
stainless steel legs fitted with 4 adjustable flanged feet for
securing to the floor. Exterior shall be stainless steel #4 finish
with removable side panels for easy access to boiler.