Insinger CA-3C 36

Insinger CA-3C 36" Door Type Pot/Pan/Utensil Dishwasher


Insinger CA-3C 36" Door Type Pot/Pan/Utensil Dishwasher

Disclosure The image above may not exactly represent the product


Call or Chat Call or Chat

Pot & Pan Washer, Rack Type, single rack, corner design, approximately 25 rack/hour capacity, over/under rotating spray arms, stainless steel frame, legs & feet


Product PDF

Insinger CA-3C Specs

Brand Insinger
Model Number CA-3C
Weight 600 lbs
Width 36.5"
Depth 35.13"
Height 82.25"
Rack capacity approximately (25) racks/hour
Construction stainless steel
Racks single
Load Design corner
Spray arms over/under rotating

Insinger CA-3C 36" Door Type Pot/Pan/Utensil Dishwasher

Insinger CA-3C Standard Features

  • Automatic door type utensil washer with timed wash and rinse cycle
  • Capacity- 25 24" x 28" racks per hour or 150 bun/pans per hour or 100 steam table (2" thick) pans per hour
  • Fully automatic operation with power on/off button
  • Cycle starts when doors are closed
  • Rinse pressure regulator
  • Hold-Down Rack System for secure washing
  • Rollers make getting large racks in and out easier
  • Wash tank heat: electric, steam injection
  • Pressure regulator
  • Single point electrical connection
  • Low water protection
  • Door safety switches
  • 1 vent opening with adjustable damper
  • Inspection door
  • Vacuum breaker on all incoming water lines
  • Capillary thermometer for wash and final rinse
  • 304 stainless steel construction
  • Stainless steel front panel
  • Automatic fill
  • Detergent connection provision
  • Hold-down rack system
  • Manual bypass selector switch
  • Side-mounted control panel (NEMA 12)
  • Simplified scrap screen design
  • Interchangeable upper and lower spray arms
  • Standard frame drip proof motor
  • Rack assortment- 1 general utility, 1 bake sheet, 1 basket
  • Manifold clean-out brush
  • SureFire® Start-Up & Check-Out Service

Insinger CA-3C Specifications

  • CONSTRUCTION- Hood and tank constructed of 14 gauge 18-8 type 304 S/S. Hood unit of all welded seamless construction. S/S frame, legs and feet. All internal castings are non-corrosive lead free nickel alloy or bronze.
  • DOORS- A front inspection/clean-out door and two simultaneously opening operating doors. Operating doors balanced by externally mounted springs. Extra large die formed 18-8 type 304 S/S doors ride in all S/S channels. A triple ply leading edge on the door channels made of S/S.
  • PUMP- Centrifugal type “packless” pump with a brass petcock drain. Construction includes ceramic seal and a balanced cast impeller on a precision ground stainless steel shaft, extension or sleeve. All working parts mounted as an assembly and removable as a unit without disturbing pump housing. One 5 hp motor, standard horizontal C-face frame, drip proof, internally cooled with ball-bearing construction.
  • CONTROLS- Side-mounted control cabinet, NEMA 12 rated, housing motor controls and overload protection, transformer, contactors and all dishwasher integral controls. All controls safe low voltage 24 VAC.
  • SPRAY SYSTEM- Wash and rinse spray systems made of 18-8 type 304 S/S pipe threaded into cast hub assemblies. Upper and lower spray assemblies are interchangeable and are removable without the use of tools
  • WASH- 2 power spinning wash arms above and 2 power spinning wash arms below, each designed with 8 high pressure action cleansing holes.
  • FINAL RINSE- 2 power spinning wash arms above and 2 power spinning rinse arms below, each designed with 3 nozzles
  • DRAIN- Drain valve externally controlled. Overflow assembly with skimmer cap is removable with the use of simple tools for drain line inspection. Heater is protected by low water level control.
  • Shipping Weight : 800 lbs
Write Your Own Review
You're reviewing:Insinger CA-3C 36" Door Type Pot/Pan/Utensil Dishwasher
Your Rating