Lakeside 5632 Elite Series Meal Delivery Tray Cart, 32 Tray Capacity

Why use Lakeside 5632 Meal Tray Delivery Cabinet ?

Designed for delivery of insulated meal trays.

Lakeside 5632 Standard Features

• Accommodates 14” x 18” or 15” x 20” size trays, two per ledge.
• Doors open 270° for unobstructed access.
• Paddle latch door catch assures positive door closure and convenient one-hand opening.
• Sturdy welded tubular push handle for increased maneuverability.
• Cart body and removable stainless steel ledge panels are easily cleaned and sanitized.
• Base corner bumpers protect walls, furnishings and doors.
• Compartment floor drains facilitate interior cleaning.
• Increased capacity and visibility during transport.

Lakeside 5632 Specifications

• Unit shall be of stainless steel welded and riveted construction to accommodate 14” x 18” (356 x 457 mm) or 15” x 20” (381 x 508mm) trays.
• Material thickness shall be of 16 gauge for top and floor/base, 20 gauge for sides and back.
• Doors shall be of 20 gauge insulated double-pan design, and shall be mounted to unit frame with two each 3” (76 mm) heavy-duty stainless steel hinges.
• Hinges shall be welded to door and unit frame.
• Doors shall swing 270° to provide full access to tray compartments, and shall be easily removable by lifting off of hinges.
• Door latches shall be recessed paddle design.
• Tray ledges shall be 18 gauge stainless steel angle, welded to an 18 gauge stainless steel frame panel at 5¼” (133 mm) spacing.
• Ledge panels shall be shall accommodate both 14” x 18” or 15” x 20” trays (two trays per ledge), and shall be removable for easy cleaning.
• Tray compartments shall have vents on end panels and shall have perforated center floor drains.
• Unit base shall have 1¼” (32 mm) thick extruded PVC rounded bumpers mounted to corners.
• A 1” tubular push handle shall be welded to one end of the unit.
• Unit shall have four each extra-load plate type casters, two fixed and two swivel, mounted to a 14 gauge stainless steel dolly on unit base.
• Swivel casters shall have shielded ball bearing races and zerk filltings for lubrication of bearings.
• Caster wheels shall be 6” (152 mm) diameter with 2” wide, non-marking, rounded cushion tread.
• Unit shall be NSF listed
• Overall Size : 55-3/4" x 34-3/4" x 52-1/2" (1416 x 876 x 1334)
• Ship Wt. : 365 (166)