Market Forge MT-25EO Tilting Electric Kettle

Market Forge MT-25EO Tilting Electric Kettle

MRF-MT-25EO
Details
My Account Hello, Guest
Login or Register

Market Forge MT-25EO Tilting Electric Kettle

SKU MRF-MT-25EO
Disclosure The image above may not exactly represent the product

$38,684.00

Call or Chat Call or Chat


Tilting Kettle, electric, 25 gallon capacity, manual tilt, 2/3 steam jacket design, electric controls, low water cut-off, pressure gauge, air vent, safety relief valve, water level sight gauge, automatic cold water steam condenser system, automatic cold water boiler fill, electric solenoid valves for steam, drain & water, swing spout faucet, steam control valve, 2" draw-off with removable strainer, pan carrier, hinged spring assist cover, 316 stainless steel liner, modular cabinet base, stainless steel construction, (4) 6" stainless steel legs with flanged feet

Certifications

NSF

Market Forge MT-25EO Specs

Brand Market Forge
Model Number MT-25EO
Weight 410 lbs
Width 36"
Depth 33"
Height 65.5"
Certifications NSF
Capacity 18 - 26 gallon
Base cabinet base
Kettle Liner 316 stainless steel
Kettle Jacket partial jacket

Market Forge MT-25EO Tilting Electric Kettle

Market Forge MT-25EO Standard Features

  • 25 gallon (95 liter), modular base, electric, tilting kettle
  • Shall be a Market Forge Model MT-25EO / MT-40EO steam jacketed tilting kettle with self-contained electric boiler.
  • Kettle shall be of stainless steel mounted in an enclosed cabinet base containing a 24 kW electrically powered steam boiler for operation of the kettle.
  • Water Treament System comes standard.
  • Cooking temperature shall be controlled with a steam control valve located on the right side of cabinet top.
  • A hot and cold water fill faucet with swing spout shall be located on cabinet top.
  • Kettle shall be equipped with a 2” (51mm) sanitary draw-off valve which shall be enclosed for sanitary purposes.
  • This valve will empty into a swing drain which shall be removable without tools and shall be equipped with a removable stainless steel strainer.
  • Unit shall include a one-piece counter-balanced stainless steel cover.
  • Cabinet base shall be of modular design to match other Market Forge equipment and enclose steam boiler.
  • Kettle base shall have 6” (152mm) stainless steel legs with hold-down 4 flanged feet.
  • The base front shall have reinforced die-formed stainless steel door with magnetic latches.
  • Kettle shall tilt upright to allow complete emptying of contents under positive control by turning the removable crank.
  • Kettle is equipped with a steam trap located on bottom of kettle.
  • A pan support, removable without tools, shall maintain pan in horizontal position not more than 2” (51mm) from kettle lip throughout tilting angle.
  • 25 & 40 Gallon kettles come standard with 316 liner.
  • Pan support shall hold: one 12” x 20” x 2 1/2” deep pan (305mm x 508mm).
  • Steam boiler shall be nickel plated mounted independent of kettle within the cabinet base and allow for separate replacement of heating elements.
  • The MT-25EO and MT-40EO shall bring 20 gallons of water to a boil, with cover down, in aproximately 35 minutes.
  • Unit shall include as standard: electric controls, low water cut-off, pressure gauge, air vent, saftey relief valve, water level sight gauge, automatic cold water steam condenser system, automatic cold water boiler fill and electric solenoid valves for steam, drain and water.
  • Boiler also includes and a single ASSE approved, check valve/backflow preventer to the boiler feed.
  • Steam boiler shall be ASME constructed and National Board Registered.

Market Forge MT-25EO Specifications

  • Overall Size : 33"(d) x 65.5"(max. height)
  • Shipping Weight : 410 lbs. (186kg)
Write Your Own Review
You're reviewing:Market Forge MT-25EO Tilting Electric Kettle
Your Rating